Monthly Archives: February 2016

Professional training would be good for most of the Plywood QC/QA Parts 15 :Plywood Edges trimming Production CHecking

Actually,some of the QC did not know the Plywood Trimming importance ,from the trimming production ,we can find that the real INSIDE CORE quality from the ORIGINAL edges quality of the plywood without any MAKE-UP or DECORATION . Just go to the trimming production process to check ,how are the …

Read More »

Professional training would be good for most of the Plywood QC/QA Parts 12 :Edges glue bond strength

When visiting new suppliers or checked old suppliers’s plywood quality ,Don’t forget to CHECK THE EDGES ,FIND THAT THE GLUE BOND STRENGTH IS GOOD OR NOT ? CAN YOU FIND SOMETHING  DIFFERENT ? How to test the Glue bond strength ?THis is one of the simple way to test if …

Read More »

Professional training would be good for most of the Plywood QC/QA Parts 11 :Sanding Production Process

Plywood Sanding is very important ,before placing the PO ,make sure your customers need sanded plywood or UN-SANDED PLYWOOD . Sanded plywood,need the sanding machine ,care so much about the surface. Un-sanded plywood,care less about the surface . The sanded belt ‘s grit decide the final sanding quality ,how much …

Read More »

29 CFR 1910.28 – Safety requirements for scaffolding.

Source from :https://www.law.cornell.edu/cfr/text/29/1910.28 1910.28 Safety requirements for scaffolding. (a) General requirements for all scaffolds. (1) Scaffolds shall be furnished and erected in accordance with this standard for persons engaged in work that cannot be done safely from the ground or from solid construction, except that ladders used for such work …

Read More »

Code of Safe Practices of Scaffold Planks

Source from http://www.superiorscaffold.com/  : pleas learn more and read more ,then you would be more knowledge on the quality and isnpection .   For Frame Scaffolds, System Scaffolds, Tube and Clamp Scaffolds and Rolling Scaffolds DEVELOPED FOR INDUSTRY BY SCAFFOLD INDUSTRY ASSOCIATION, INC. (SIA) and THE SCAFFOLD, SHORING & FORMING …

Read More »

ALUMINUM/PLYWOOD SCAFFOLD DECK Deck or Walkboard

Source from :http://www.scaffoldingdepot.com/scaffolding-board.htm Scaffolding Boards And Planks Home –   Scaffolding Frames and Accessories Safway Style Frames- Waco Red Style Frames – Biljax Style Frames- Vanguard Style Frames – Masonry Veneer Jacks – Cross Braces – Screw Jacks – Casters – Guard Rails – Side Brackets – Boards/Planks- Stair Units – Replacement Studs – Accessories and Small Parts Bakers …

Read More »

Professional training would be good for most of the Plywood QC/QA Parts 10:Plywood hot Pressing Production Process

ACTUALLY i WOULD LIKE TO DO SOMETHING TO TELL THE MANUFACTURER OR BUYERS,pay special attention on the hot pressing production process . 1,hot pressing time 2,hot pressing pressure rate 3.hot pressing temperature We can understand why the foreign importers or domestic buyers they would like to know the weight of …

Read More »