Daily Archives: February 1, 2016

the plywood history and some uses of the plywood,brief history of plywood

Source from http://www.wonkeedonkeetools.co.uk/materials/what-is-plywood/ ,the plywood history and some uses of the plywood … What is plywood? Plywood boards or “sheets” are made up of three or more thin layers of real wood that are glued together. The layers are known as “plies”, hence the name “plywood”. Generally, the thicker the plywood, …

Read More »

A baltic birch plywood primer

A baltic birch plywood prime Source from :http://www.dans-hobbies.com It seems like every other month or so,  someone asks about Baltic Birch plywood on one of the forums I frequent.  I think one of reasons so many questions exist, is because there isn’t much information on the net. The following is …

Read More »

Structural Plywood Field Repairs

Source from  : http://www.tecotested.com/techtips/tt_plywoodfieldrepairs Structural Plywood Field Repairs Plywood surface defects can often be successfully repaired by field repairs to or near its original condition. In allowing these types of field repairs, the plywood must be decay free and all damaged wood removed. The risk lies in covering up progressive defects …

Read More »

Face veneer Manufacturing Process (very detailed )

Source from http://mbveneer.com/process/splicing-veneer ,very detailed knowledge for you to learn and select the suppliers with professional knowleges . Log Preparation Grading the Log: Select the species required Determine the lengths required Decide on the veneer cut desired Select grade and price suitable for current market conditions Scale the logs Sort and …

Read More »

Engineered Veneer (EV) Manufacturing Process

Engineered Veneer (EV) Manufacturing Process Source from :http://www.meyertimber.com/ Engineered Veneer (EV) combines non-tropical raw materials with state of the art manufacturing technologies, to produce high quality veneers for the surfaces of hardwood plywood products, which would previously have used potentially higher risk (in relation to EUTR) tropical veneers. EV was initially developed for …

Read More »

Veneer Grades

Veneer Grades Source from  : http://apawood-europe.org/products-trademarks/plywood/trademarks/veneer-grades-2/  Veneer in a finished US trademarked plywood panel must conform to one of the grade designations listed in the US PS 1 standard. These requirements apply to panels measuring 2440mm (96”) x 1220mm (48”) and are proportionate for other sizes. There are six grades of veneer: …

Read More »

Some Information On Veneer Manufacturing Process

Some Information On Veneer Manufacturing Process Source from :http://vancouverdoorco.com/some-information-on-veneer-manufacturing-process/ A veneer is a covering made of very thin wood placed over a layer of coarser wood or any other material. The lower layer is usually one of lesser decorative or aesthetic value. In the context of plywood manufacture (from hardwood …

Read More »