(For beginner) Plywood knowledge& Manufacturing Experience Part 29: CFC Plywood construction

When producing the CFC core ,must select good MDF as the crossband ,this is normally oversize MDF larger thant he standard MDF sizes .

(CFC Plywood) combines MDF cross bands with softwood veneer inner plies. The MDF cross bands provide an ultra smooth surface to reduce telegraphing through the face, while the veneer innerplies maintain the strength and screw-holding power of a veneer core panel.

Plywood Panel cores include veneer core, veneer core with composite cross bands (CFC), MDF and particleboard

CFC – Combination Fiber Core has wood veneer inner plys and a thin layer of MDF as it’s cross bands. This aspect of the panel offers both the proven track record and screw holding aspect of veneer core, as well as the superior finishing standards expected of a MDF core panel at the same weight as traditional veneer core panels.

Plywood

Average Density: 400Kg/m³
Glue: MRE1 or WBP Phenol bonding
Grade: CC/CC; BB/CC; BB/BB
Sizes: 2440/2500mm x 1220mm
Thickness: from 2,7mm up to 44mm
Tolerances: -0/+0,3mm
Testing: CE4

 

Pre-painted Plywood

Average Density: 400Kg/m³
Glue: MRE1 or WBP Phenol bonding
Grade: A/A (all RAL colours possible)
Sizes: 2440/2500mm x 1220mm
Thickness: from 12mm up to 44mm
Tolerances: -0/+0,3mm
Testing: CE4

 

Special usage Plywood

Faced with 2,5mm MDF
Average Density: ~480Kg/m³
Glue: MRE1 or WBP Phenol bonding
Grade : A/A
Sizes: 2440mm x 1220mm
Thickness: from 15mm up to 44mm
Tolerances: -0/+0,3mm
Testing: CE4

 

Check Also

Plaut International Ltd

Plaut International Ltd We are one of the UK’s leading timber import agents, through our …

Leave a Reply

Your email address will not be published. Required fields are marked *