(For beginner) Plywood knowledge& Manufacturing Experience Part 36: stop the fire and organize the cable for plywood machines

The location of the fire pool should be suitable for stop the fire ,convenient to stop the fire, the fire can be safely stopped, the amount of the water must be sufficient, the pipe to be unobstructed, the pump to run well.

Manufacturing plywood, so many dry wood veneer and plywood ,the wood is not afraid of water, but the fire. So,    plywood or wood veneer   need the corresponding fire equipment. sand and water both   .

Fire workers usually have to carry out regular exercise, how to use the fire equipment, how to escape, how to carry out fire fighting, how to carry out the operation of equipment and rescue.How to carry out maintenance and repair of equipment.Pay attention to check the electrical wiring aging, no production areas in the smoking and open flame, etc..

HAve a checklist to check everything …DSC06709 DSC06668 DSC06677

DSC06667

 

Check Also

H20 beams Install and INspection Checklists ,Defects

H20 beams Install and INspection Checklists ,Defects

H20 beams Install and INspection Checklists ,Defects H20 BEAMS The quality of our products is …

Leave a Reply

Your email address will not be published. Required fields are marked *