(For beginner) Wood Face veneer knowledge & Manufacturing Exaperience Part 3: THICK RED SOFTWOOD AND HARDWOOD FACE VENEER

HAVE YOU CHECKED THE ACTUAL THICKNESS OF THE WOOD FACE VENEER THE SUPPLIERS USING FOR YOU NOW ?0.55MM TO 0.60MM THICK RED SOFTWOOD AND HARDWOOD FACE VENEER TO TAIWAN AND MALAYSIA AND INDONESIA AND SOUTH KOREA

I visited many factories in linyi area and shanghai area and zhangjiagang ports area specialize in many kinds of wood veneer, including Chinese veneer, exotic veneer, engineered veneer, dyed veneer, floor veneer and veneer edge banding. Our main species are: Black Walnut, Cherry, Oak, Maple, Ebony, Zebra, Sapele, Chinese Ash, Chinese Oak, Chinese Walnut, Chinese Maple, Elm, Basswood, Pine, Chinese Cherry, Golden Birch, Golden Teak, Rotary Cut Okoume and so on.

NATURAL AND ENGINEERED FACE VENEER MADE IN LINYI

0.5mm to 0.80mm red hardwood face veneer exporting grade

Red Canarium Natural Wood Veneer  , Gurjan Face Veneer | Natural Keruing Face Veneer  ,cut apitong wood veneer,Okoume,Sapelle,Bintangor ,Pencil Cedar,radia pine ,Poplar ,Birch ,Red Oak ,CHERRY .White maple. ….

0.6mm (Actual thickness 0.55mm ) okoume face veneer exporting to Taiwan and INdonesia

Rotary Cut Wood Veneer of wood-veneer

Wood veneer Rotary cut veneer hardwood veneer,MLH Veneer
Species:Rotary Cut Natural Poplar Wood Veneer Sheet1. Rotary cut poplar veneer.

2. Size: 4’ x 8’ x 0.40mm /0.45mm /0.55mm /0.60mm.

3. Grain: wild grain.

4. Veneer Type: Natural Wood Veneer

5. It is mainly applied to the surface of the furniture, plywood, MDF, chipboard and block board, etc.

Red veneer: Okoume veneer,Bintangor veneer, Agathis veneer,Dellenia veneer,Pencil cedar veneer, Red canarium veneer,Taun veneer,PLB,Keruing veneer,etcRotary Keruing Veneer for Plywood – wood-veneer Rotary Cut Veneer of homefurniture233

Okoume, Mersawa, Agathis, Bintangor, Birch, Pine, Poplar, BAS, Rok-fa, GAG, PLB, CHENCHEN, Red Ceder ,Bamboo veneer and other MLH Veneersokoume rotary cut veneers of linyip-amp-c

Size:1220*2440mm
Core:poplar,okoume,bintangor,teakGlue:E0,E2,E1,MR,WBP,MELAMINE
Thickness:2-30mmMoisture content:8%-15%

Grade:BB/BB,BB/CC,CC/CC,CC/DD

Keruing veneer
Specification: 4′ x 8′, 3′ x 6′, 4’x7′
Color: red Thickness: 0.25-0.5mm

Rotary Cut Poplar Veneer

Size: 4′ X 8′ (2500mm * 1270mm)
Thickness: 0.15mm – 0.60mm
Grade: Face A/B,Face C, Back D/E

Yellow/white veneer:mersawa veneer, basswood veneer,Erima veneer,Antiaris veneer, White planchonella, Light celtis,White Walnut ,poplar,etc

Size: 4×8,4×7,3×7,3×6 ,other size according customers’ request

Length:1800-2500mm Width:910-1280mm

Thickness: 0.15-0.60mm

Grade: FACE ,BACK

Usage: it is used as the face or back of plywood,blocboard,

chipboard,MDF, door,furniture

Package: in crate with plywood and steel tape

Rotary cut veneer also named Natural veneer,wood veneer which is rotary- cut from nature logs.Because of its nature character ,there are many grades for its different quality.It is widely used for face and back of plywood,blockboard,Mdf,chipboard ,film faced plywood,furniture and so on.

Check Also

Conditional Of Wood-Based Panel Products

Conditional Of Wood-Based Panel Products The wood fibre in wood-based panel products will continue to do …

Leave a Reply

Your email address will not be published. Required fields are marked *