WHAT IS THE ONE TIME HOT PRESS FILM FACED PLYWOOD and WHAT IS THE TWO TIMES (THREE TIMES )HOT PRESS FILM FACED PLYWOOD ? ?

what is the two times hot press film faced plywood ?

Two time hot press ,means the veneer core are hot pressed two times ,for example ,18mm is normally 11 plies .THe factory press 9 plies first by one time cold pressing and then hot pressing.The workers repair the 9-ply platform and then smoothly sanded by 50grit sand paper or better sand paper .This is one time hot press already .

The second time hot press is started from the second hot pressing.The 9-ply platform will be laminated with the top and bottom layers of short-grain poplar veneer ,then use the hot pressing machine to make the SECOND TIME HOT PRESS.

After the second time hot press,the platform is 11-ply already .Then the manufacturers will sand the 11-ply platform smoothly by sand paper .

The last step is laminate the film by hot pressing ,just need about 2 to 6 minutes in the hot pressing ,then you can see the finished film faced plywood.

We can also call it three time hot press plywood,or call them 2-time sand ffp.

If the platform 11-ply just pass one time hot pressing and sanding by sand paper,then we can also call it two time hot press film faced plywood,but call it one-time sand film faced plywood.The quality is lower than two-time sand film faced plywood.

……

one time hot press film faced plywood,means the finished film faced plywood is just only one time cold pressing and one  hot press ,laminated with the film together after the ONLY ONE TIME HOT PRESSING.

No need to sand the veneer core platform used for the film faced plywood,even no veneer core platform repair ,the veneer core platform are cold pressing first and then laminate the film ,the workers stapled the film together with the platform ,then put them into the hot pressing machine ,after about 40 to 50 minutes hot pressing ,then you can see the finished one time hot press film faced plywood .

One time hot press film faced plywood have its advantage ,prices advantage ,raw materials advantage ,and even no burn marks .

The disadvantage is not smoothly and no TWO TIME HOT PRESS flat surface,and no uniform tight thickness .

MOre and more markets and areas they prefer to use one time hot press ffp already .

JOINT CORE OR RECYCLED CORE FILM FACED PLYWOOD MANUFACTURING DEFECTS

Visited some plywood manufacturers ,look at these manufacturing defects ,some holes even have the concrete left ,when you use blade to cut them ,make sure your blade will be not destroyed or hurt the people closed to them .So ,if the joint core film faced plywood are used whole piece not cutting them to small pieces and used for low building construction as the underlayment or packing ,that is good materials .

Please don’t use them to make high building construction or request them to standard heavy materials or support heavy materials .

If you want them to support heavy materials ,make sure you tell your suppliers to pay attention on the prices and quality requriement .

When your chinese plywood inspectors inspect them ,make sure they can test the strength,stand a people about 75kgs to 80kgs people ,to see if the single plywood can support the people ?

Standard film faced plywood production ,regular selected raw core veneer ,custom-made film and logo design ,you can see the plywood edges,without major core voids and overlaps ,suitable for high end uses .

Brown film faced plywood manufactured for European markets Germany and UK and Poland and Holand,Russia

The veneer core is two times hot press ,two times calibrated sanded ,exterior glue

Chinese brown film plastics

All Made IN CHINA

Ship from Lianyungang port and Qingdao Ports by 40’HQ cONTAINER

Dynea Brown Film faced plywood with BLUE Water-proof paint edges to USA

Combi Core ,Dynea Phenolic WBP glue ,1220x2440x18mm

Austria Belgium Czech Republic Finland France Germany Greece Hungary Israel Italy Poland  Slovakkia  Sweden Taiwan The Netherlands  The USA
Dimensions                        Layer         Number Thickness
1250mmX2500mm       13+2           18mm
1250mmX2500mm      15+2             21mm

Glue:
Wpb Glue,

Wpb Dynea Phonelic Europe Glue

This is the same quality like Russia indonesia,malaysia or india  film faced plywood.The core are not same ,it is full hardwood core

Mixed Tropical Hard Wood and poplar combi core .

.

Dark brown 120g / m²; Both surfaces are are covered with Dynea Phenolic Film.
Edges are painted and are isolated with Epoxy Paint.

User Area:
Construction, transportation, furniture and packaging industry.

2’X8′(1220×1200 )X18MM Brown FILM FACED PLYWOOD

Three time hot press (two times sanding of the plywood core ),tight thickness tolerance .

Phenolic WBP ,Hardwood Core

FF Plywood:

4′ x 8′ and 2’x8′ in 12mm and 18mm thickness

2’x2′, 2’x4′, 3’x3′, 4’x4′,1’x4′,2’x10′,2’x12′,2’x8′ ,also supply ,Melamine AND MR  glue ,Combi core,poplar core 

Feet
4’x8′
4’x9′
4’x10′
4’x12′
2’x8′
2’x9′
2’x10′
2’x12′
Millimeters
1220×2440
1220×2745
1220×3050
1220×3660
610×2740
610×2745
610×3050
610×3660

We also supply the following Plywood items :

Ordinary Plywood

Marine

Faced Plywood

Oak Plywood

plywood

Brown Film

MDF

Ordinary MDF

Oak MDF (1 side)

Oak MDF (2 sides)

Film Faced Plywood
Model : Film faced plywood
Size : 1220*2440/1250*2500/1250*3050/610*2500
Thickness : 6mm–48mm
Core : poplar ,combi,hardwood,birch
Glue : MR.WBP
Film color : brown ,black,red yellow

Film Faced Marine Plywood
Model : FILM FACED MARINE PLYWOOD
Size : 1220*2440/1250*2500/1250*3050/610*2500MM
Thickness : 6mm–48mm
Core : poplar ,combi,hardwood,birch
Glue : MR.WBP
Film color : brown ,black,red yellow

Construction Plywood
Model : Film faced plywood
Size : 1220*2440/1250*2500/1250*3050/610*2500
Thickness : 6mm–48mm
Core : poplar ,combi,hardwood,birch
Glue : MR.WBP
Film color : brown ,black,red yellow

Brown Film Faced Plywood
Model : Brown Film faced plywood
Size : 1220*2440/1250*2500/1250*3050/610*2500
Thickness : 6mm–48mm
Core : poplar ,combi,hardwood,birch
Glue : MR.WBP
Film color : brown ,black,red yellow

Black Film Faced Plywood
Model : FILM FACED PLYWOOD
SPEC : 1220*2440mm/1250*2500mm/610*2500mm/1220*3050mm,9-30mm
GLUE : MR, WBP, MELM, E1, E2
FACE AND BACK : DYNEA BROWN FILM ?BLACK FILM
CORE, POPLAR, BIRCH, HARDWOOD

Anti Slip Film Faced Plywood
Model : Film faced plywood
Size : 1220*2440/1250*2500/1250*3050/610*2500
Thickness : 6mm–48mm
Core : poplar ,combi,hardwood,birch
Glue : MR.WBP
Film color : brown ,black,red yellow

Anti Slip Brown Film Faced Plywood
Model : Film faced plywood
Size : 1220*2440/1250*2500/1250*3050/610*2500
Thickness : 6mm–48mm
Core : poplar ,combi,hardwood,birch
Glue : MR.WBP
Film color : brown ,black,red yellow

Check Also

The Bending Strength of Medium Density Fibreboard (MDF) from

The Bending Strength of Medium Density Fibreboard (MDF) from … https://www.scientific.net/KEM.334-335.77 by MA Jamaludin – …

Leave a Reply

Your email address will not be published. Required fields are marked *