WITH THICK WATERPROOF PAINT OF THE EDGES OF THE FILM FACED PLYWOOD

WITH THICK WATERPROOF PAINT OF THE EDGES OF THE FILM FACED PLYWOOD

Brown film /Black film /Red Film /Yellow Film /Dark brown Film,dark black film

Primary usage  in formworks systems or during the hand shuttering Construction, transportation and sports fields trucks, wagons and van floor covering,covering edges by painting them with acrylic paint.

We make sure that every single piece have thick and seamless paint to stop the water or moisture penetration .

Combi Core ,two times hot press ,1220x2440x18mm/12mm  1250x2500x18mm/21mm/15mm /4mm /9mm

Can you accept these painting for the edges of the film faced plywood ?

I visited some factories ,some of them have low quality painting for their film faced plywood used for exporting and local domestic markets .See the pictures here ,some of them are not well painted by the water-proof painting ,how to stop the water penetration ?When the inspectors inspect the plywood,they should pay attention on the painting ,need thick painting coating .

IMPORTED DYNEA BROWN FILM FACED PLYWOOD WITH TRADEMARK PLEX TM to Poland,France,Germany Denmark and Belgium ,RussiaImported Korea film and Finland Dynea Brown Film

Combi hardwood poplar Birch veneer core

Standard Production Process

  • 100% birch veneer
  • 100% poplar veneer
  • 100% hardwood veneer
  • 100% bamboo veneer

2440 / 2500 x 1220 / 1250 mm
1200 / 1220 / 1250 / 1500 / 1525 x 2440 / 2500 / 2745 / 3000 / 3050/6000mm

  • Formaldehyde emission: E1,E2
  • Moisture content: max 10 %
  • Density: 550 – 700 kg/m³
  • Phenol film, dark brown, weight 120 g/m². Different colors and film weights are available on request. Wear resistance of the surface demands on the film weight and can be presented as the following:
    • 120 g/m² – 400 rotations according to Taber test (EN 438-2)
    • 220 g/m² – 750 rotations according to Taber test (EN 438-2)
    • Phenol film, dark brown, weight 170 g/m².
    • Length (grain): 1220, 1500, 1525, 2440 mm
    • Width: 2440, 2500, 3000, 3050 mm
    • Thickness: from 4 to 40 mm
    • Glue type: Phenolic (phenol- formaldehyde) and Melamine (urea-melamine-formaldehyde) resin cross bonded weather resistant according to EN 314-2
    • Film Weight: 120-240 g/sq.m
    • Film Color: DBO – Dark Brown Opaque
    • Edges: Processing by waterproof acrylic paint
Dimensions, mm 1220X2440, 2500 х 1250,  1250 x 2500,  1500×3000.
Thickness, mm 4, 6, 9, 12, 15, 18, 21, 24, 27, 30.
Tolerance on length (width) +/- 2mm
Grade of face veneer AAA,AA
Number of plies from 5 up to 21 depending on thickness
Surface color in assortment
Edges processing by waterproof acrylic paint
Basis Poplar Core,Combi Core,Full hardwood core,Birch,Pine core,tropical hardwood  core,imported hardwood core  plywood
Formaldehyde emission class E1 (up to 8 mg per 100g of bone dry plywood)
Water resistance Melamine Glue,MR glue ,Phenolic WBP mark
Moisture content, max 5-12 %
Ultimate shearing strength not less 1.5 MPa (birch base), not less 1.0 MPa
Ultimate tensile strength not less 40 MPa
Ultimate creasing strength not less 60 MPa
Certification  EN 13986, EN 636-3

film faced plywood 1220x2440x18mm /12mm/9mm/4.0mm

Across the world, including Saudi Arabia, Lebanon, Algeria, Canada,  Gabon, Cameroon, England, Poland, Cuba, Belgium, Germany, United Arabic Emirates, Portugal, Qatar, New Caledonia,saudi arabia

FILM FACED PLYWOOD (ONE TIME HOT PRESS FFP AND TWO TIMES HOT PRESS FFP CORE DIFFERENCE)

Generally speaking.  it is hard to tell the differences between high quality one hot press FFP and two hot ones.

But there still be a knack. One hot press FFP with no sanding. So the grain of cores are easily to be seen or touched through film.

another difference is if good one time hot press ffp ,the core veneer is much better than most of the two times hot press core veneer quality ,because the manufacturers want to make good quality one time hot press ffp without burn marks or less manufacturing defects like or similar two times hot press ffp .so ,means the one time hot press ffp core is much better than two times hot press ffp .

well,we can not say all of the one time hot press ffp core veneer is better than two time hot press ffp ,but what i have seen is one time hot press ffp core veneer is much better than two times hot pressing ffp if they want good one time hot press ffp like two time hot press ffp.

Check Also

H20 beams Install and INspection Checklists ,Defects

H20 beams Install and INspection Checklists ,Defects

H20 beams Install and INspection Checklists ,Defects H20 BEAMS The quality of our products is …

Leave a Reply

Your email address will not be published. Required fields are marked *