UV PRE-FINISHED WHITE BIRCH PLYWOOD PRODUCTION LINE and quality levels

Some Manufacturing Defects of the UV white Birch Plywood .

Most of the UV plywood factories have very modern UV production lines and high quality of the UV paint .

Look at these UV birch plywood manufacturing defects ,when you found them ,try to put them outside and not delivery them out of the factories.

Birch Plywood is available in:
C/D Grade 1/4″ x 4′ x 8′ Natural
1/4″ x 4′ x 8′ UV Pre-Finished One Side
1/2″ x 4′ x 8′ Natural No Finish
1/2″ x 4′ x 8′ UV Pre-Finished 2 Sides
3/4″ x 4′ x 8′ Natural No Finish
3/4″ x 4′ x 8′ UV Pre-Finished 1 Side
3/4″ x 4′ x 8′ UV Pre-Finished 2 sides
This is used in cabinet building, fixtures, furniture, and general construction. It is the lease expensive hardwood plywood option.

Natural Birch Plywood is available in:
B-2 Grade 1/4″ x 4′ x 8′
B-2 Grade 3/4″ x 4′ x 8′
D-3 Grade 3/4″ x 4′ x 8′
It is used in cabinet building, fixtures, furniture, and general construction.

UV PRE-FINISHED WHITE BIRCH PLYWOOD AND NATURAL (RED BIRCH PLYWOOD ) BIRCH PLYWOOD TO USA AND CANADA

UV PRE-FINISHED PLYWOOD

UV Birch Plywood

Glue: Exterior, Interior E1, E2
Grade: B/BB, BB./CC, C/D, D/E, UTY
Size: 1220X2440MM, 1250X2500MM, 1525X3050MM, 1500X3000MM, 1800X3000MM
Thickness: 2.5mm, 3mm, 4mm, 5mm, 6MM, 9MM, 12MM, 15MM, 18MM, 21MM, 24MM, 27MM, 30MM, 35MM, 40MM, 45MM, 50MM
UV Prefinished Fancy Plywood

Ash Plywood
Beech Plywood
Cherry Plywood
Maple Plywood
Oak Plywood
Teak Plywood
Sapeli Plywood
Rosewood Plywood
Walnut Plywood

Glue: E1, E2
Grade: AAA, AA, A Grade
Size: 1220x2440MM
Thickness: 2.5mm, 3mm, 4mm, 5mm, 6MM, 9MM, 12MM, 15MM, 18MM, 21MM, 24MM, 27MM, 30MM, 35MM, 40MM, 45MM, 50MM

RED OAK PLYWOOD MADE IN CHINA TO USA AND CANADA MARKETS (NORTH AMERICA MARKETS MOSTLY)

Uses – Widely used in cabinet and furniture making.

Available Products:

Hardwood Plywood:

  • 1/4″ B-2 RED OAK WPF VENEER CORE
  • 1/4″ C-3 RED OAK WPF  VENEER CORE
  • 1/2″ C-3 RED OAK WPF VENEER CORE
  • 5/8″ B-2 RED OAK WPF MDF CORE
  • 3/4″ B-2 RED OAK WPF VENEER CORE
  • 3/4″ B-2 RED OAK WPF MDF CORE
  • 3/4″ C-3 RED OAK WPF VENEER CORE
  • 3/4″ C-3 RED OAK WPF MDF CORE
  • 3/4″   WPF VENEER CORE
  • 3/4″ C-3 WPF VENEER CORE UV Finished 2 Sides
  • UV prefinished White birch and Maple Drawer Sides & Bottoms Made In ChinaAll the plywood are manufacturered for Cabinets and furniture parts ,good moisture content and tight thickness tolerance .We offer MDF, Particle Board,   Natural RED Birch Plywood,Maple Plywood, Birch Plywood,Finger Joint paulownia , solid Maple .
  • •Skeleton Prints
    •Base Coat and Print
    •Base Coat, Print and   UV Topcoat
    •White, Black and custom colors.
    •Clear and Tinted UV.
    •UV edge fill for Particle Board
    •Foil
    •Edge banding
    •Cut to size
    •French Dovetail
    •English Dovetail
    •Drilled and Doweled
    •Matching drawer bottoms in full sheets or cut to size.

Our Prefinished Plywood provides an attractive, ready to use, White Birch finished plywood. Our UV cured, clear coated White Birch panels feature a consistent mill finish and creamy uniform white color that saves time and money. 

By using our environmentally responsible Prefinished Hardwood Plywood, you can reduce exposure to harmful VOC emissions, substantially lower both sanding and finishing costs and greatly improve productivity by eliminating the need for in-house finishing.

Cabinets, Case goods, End Panels, Store Fixtures, Furniture, Shelving, Entertainment Centers

ONE MAJOR QUALITY PROBLEMS OF THE UV-PREFINISHED WHITE BIRCH PLYWOOD

Look at these two different pictures ,one is excellent UV prefinished birch plywood ,clean and clear face without manufacturing defects ,Three thermo-set base coats and 2  UV cured top coats .It is a hard, durable and chip & scratch resistant finish.

Prefinished Plywood is is the Plywood Varnished by UV Paint.All Pre-finished must have 5 layers of UV coats with 3 epoxy/ polyester acrylate sealer coats and 2 premium epoxy acrylate UV top coats. It is available in a variety of core thicknesses and hardwood face and back combinations for numerous design options.Depened by the final application, Face Lacquered or both Face&Back acquered can be the Options. UV Prefinished Plywood is widely used in Interior&Exterior Furniture Making.

They’ll love its toughness. It resists scratches, chips and the effects of solvent wipe down. Plus, UV Wood is available in satin, medium and high gloss, can be finished on one or two sides, and is available on any core, grade and species combination. It’s perfect for kitchen cabinets, store fixtures, or anywhere a durable, clear finish is required.UV finished surface reduces VOC emissions

Plywood Cross grain and long grain sanded to ensure maximum smoothness .

Satin:  reflection (must specify)
Medium Gloss:   reflection (standard)
High Gloss:   reflection (must specify)

Following is the UV Prefinished Panel We can Supply:

UV Lacquered Birch Plywood / UV Lacquered Fancy Plywood
—UV Prefinished Birch Plywood
—UV Prefinished Birch Face/Back Poplar Plywood
—UV PrefinishedAsh Plywood
—UV Prefinished Beech Plywood
—UV Prefinished Cherry Plywood
—UV Prefinished Maple Plywood
—UV Prefinished Oak Plywood
—UV Prefinished Teak Plywood
—UV Prefinished Sapele Plywood
—UV Prefinished Walnut Plywood
—UV Prefinished Veneered Fancy MDF
—UV Prefinished Veneered Fancy Chipboard

When you buy UV plywood,sometimes you will find the following pictures with OIL STAIN quality problems,then reject them .This is not acceptable .

When you buy UV plywood,you also should ask the following questions :

1.How many base coats they use ?

2.How many top coats they use ?

3.High glossy ,Medium Gloss,Satin ?

4.Moisture content

5.Thickness tolerance

That is very simple question but decide the final plywood quality you want .

all the plywood can be UV prefinished according to your requested ,also the red oak plywood,maple plywood ,WHEN YOU BUY UV PLYWOOD FROM CHINA,MAKE SURE YOUR SUPPLIER CAN UNDERSTAND YOUR PLYWOOD QULAITY REQUIREMENT .

For kitchen cabinets, bathroom vanity interiors, shelving, store fixtures, drawer sides and     bottoms offers an advanced UV cured, permanent topcoat over high quality hardwood plywood to meet and exceed the  performance standards for shrinkage and heat resistance as well as hot and cold check resistance and chemical resistance.

5.2mm/12mm/15mm/18mm UV plywood ,4’x8′

The product features a factory applied clear topcoat produced through a flat-line finishing process. The process uses a laser precision rollcoater to apply four sealer basecoats and an ultraviolet cured topcoat consisting of an acrylate that is almost 100% solids resulting in an ideal and beautiful product.

UV clear finish on one or two sides

In addition to saving you time and money, buying hardwood plywood finished with a UV topcoat, helps to reduce emissions which are regulated in many states. Equally important, the UV topcoat is more durable than catalyzed topcoats and offers high gloss with low shrinkage.

Ultraviolet cured finishes are practically a must for kitchen cabinets  finish guidelines for chemical and water resistance. These coatings also provide good resistance to the chemicals found in the kitchen, such as the acids found in vinegar, mustard, ketchup, and fingerprints. All this makes our UV topcoated hardwood plywood extremely durable and long-lasting.

 

We have the prefinished hardwood plywood for any job. We’ll finish one or both sides to your specifications. And, by using our UV Finishedhardwood plywood, you can eliminate exposure to harmful VOC emissions. Choose from any combination of species, grade and core of hardwood plywood we produce.

Our UV Wood is perfect for use in cabinets, vanities, casegoods, end panels, shelving, drawer parts and any place a clean, durable clear finish is required.

The unparalleled quality and versatililty of UV Wood are characteristics that manufacturers absolutely love. Why? First of all, it increases productivity. With less surface to finish, workers are able to efficiently spend their time on other tasks. And since increasing productivity also increases profit, they’ll love it even more.

They’ll love its toughness. It resists scratches, chips and the effects of solvent wipe down. Plus, UV Wood is available in satin, medium and high gloss, can be finished on one or two sides, and is available on any core, grade and species combination. It’s perfect for kitchen cabinets, store fixtures, or anywhere a durable, clear finish is required.

Features and Benefits

  • Beautiful, durable finish resists scratches and chips.
  • Finished surface reduces labor time, increasing productivity and efficiency.
  • Advanced sanding technology for a smoother, more beautiful appearance.
  • UV finished surface reduces VOC emissions.
  • Regional finishing facilities for consistent availability and prompt delivery.
  • Available in a variety of core thicknesses and hardwood face and back combinations for numerous design options.

UV PREFINISHED BIRCH PLYWOOD, UV PRE-FINISHED FANCY PLYWOOD

UV PRE-FINISHED PLYWOOD

UV Birch Plywood

Glue: Exterior, Interior E1, E2
Grade: B/BB, BB./CC, C/D, D/E, UTY
Size: 1220X2440MM, 1250X2500MM, 1525X3050MM, 1500X3000MM, 1800X3000MM
Thickness: 2.5mm, 3mm, 4mm, 5mm, 6MM, 9MM, 12MM, 15MM, 18MM, 21MM, 24MM, 27MM, 30MM, 35MM, 40MM, 45MM, 50MM
UV Prefinished Fancy Plywood

Ash Plywood
Beech Plywood
Cherry Plywood
Maple Plywood
Oak Plywood
Teak Plywood
Sapeli Plywood
Rosewood Plywood
Walnut Plywood

Glue: E1, E2
Grade: AAA, AA, A Grade
Size: 1220x2440MM
Thickness: 2.5mm, 3mm, 4mm, 5mm, 6MM, 9MM, 12MM, 15MM, 18MM, 21MM, 24MM, 27MM, 30MM, 35MM, 40MM, 45MM, 50MM

UV FINISHED HARDWOOD PLYWOOD PANELS

Panels are finished on our state of the art UV line, utilizing our UV finishing system. Our UV line can accommodate panels up to 4’ wide and 10’ long and 1-1/2” thick. Our UV finish is durable, cost effective and environmentally friendly, with virtually no emissions. Birch, Maple, Oak, Alder, Cherry, Beech & many other species in stock. Wide variety of grades and cores available. We offer clear finish in different gloss levels, custom tinted finish, and graphic friendly finish. Available substrates include FSC®, NAUF, NAF & CARB II. The panels are used for Kitchen & Bathroom cabinets, Drawer components, shelving, doorskins, store fixtures, displays and many other applications. Cut to size and edge finishing available.

WHITE BIRCH MANUFACTURING DEFECTS AND NATURAL DEFECTS (PICTURES TO TEACH YOU GRADE AND INSPECT BIRCH PLYWOOD )

Indonesian/Malaysian Grade Rules

FD Grade

Free-Of-Defect, very similar characteristics to an ANSI/HPVA “A” Grade.

BB Grade

Smooth, tight cut, full length veneer. Natural characteristics of the wood such as pin knots, sound burls, color streaks and spots are allowed. Dead knots, stain and mineral streaks, decay, open splits, rough cut, torn grain, symmetrical patches are not allowed.

CC Grade

Natural characteristics of the wood are allowed. However, in comparison to the “BB Grade” the following characteristics ARE permitted: Color, dead knots and rough cut (if well puttied), and hairline splits (max. 6″).

OVL Grade

Overlay and Better Grade. In addition to BB and CC grade, OVL may contain dead knots and knot holes (if well puttied), stain and mineral streak, hairline split (max. 12″), rough cut and torn grain.

Industrial

Allows open defects such as splits and gaps at the veneer joint as well as all the natural characteristics of the wood specie.

NOTE: The BB and CC grades are usually combined and marketed as a BB/CC panel.

Chinese Grade Rules

B/C or B/2 Grade

Fairly uniform in color with slight contrasts allowed. Small conspicuous burls and pin knots allowed with a minimum number of scattered sound or repaired knots. Both faces are typically sanded smooth.The “C” back grade is typically more on the C minus to D plus grade or compatible to a #1 and #2 mix back grade on ANSI/HPVA standards.

C/D or C/2 Grade

A larger color contrast is allowed. There are a unlimited number of conspicuous burls and pin knots and greater quantity of scattered sound and repaired knots allowed. “Blended Repaired” is allowed whereby splits in the veneer will be repaired with color matched putty. The “D” back grade is typically more on the D minus grade or compatible to a #2 and #3 mix back grade on ANSI/HPVA standards.

D/E or D/3 Grade

All defects not permitted by C grade will generally be allowed on D grade. More sound and dark pin knots, repaired knot holes, longer putty repaired veneer splits will be allowed, but the number of knot holes is the major determining factor. The “E” back grade borders in grade and similarity to the #4 or reject back grade on ANSI/HPVA standards.

NOTE: The majority of these panels are laid up on a Chinese Poplar core. IT IS VERY IMPORTANT TO UNDERSTAND THE APPLICATION OF THE PANEL.
B Grade: often used for upper-end cabinetry, architectural millwork, and furniture.
C Grade: used primarily on paint grade type applications, in lower-end case work, and for cabinet interiors in upper-end cabinetry.
D Grade: used for non-visible cabinet parts.

Russian (Baltic) Birch Grade Rules

B Grade

One piece sanded face with even color. No patches, voids or mineral streaks allowed.

BB Grade

One piece sanded face with generally even color. Slight pin knots and mineral streaks allowed. Open knots and defects are cut out and replaced with oval patches.

CP Grade

This is a fall down from BB with more patches on the face that may not always be matched for color. Splits less that 0.5 mm are allowed.

C Grade

Un-sanded face that allows patches, open knots and veneer splits.

NOTE: Russian Birch panels are a consistent specie throughout the panel (core and face and back veneer).

 

3mm 4’x 8′ R/C
5.2mm 4’x 8′ R/C G1S
5.2mm 4’x 8′ R/C G2S
18mm 4’x 8′ R/C L/C
3/4″ 4’x 8′ R/C A/B
3/4″ 4’x 8′ R/C B/C
3/4″ 4’x 8′ R/C C/C C/D,D/E,E/F ,F/F

 

Check Also

Plaut International Ltd

Plaut International Ltd We are one of the UK’s leading timber import agents, through our …

Leave a Reply

Your email address will not be published. Required fields are marked *