Interior wooden door production process

Interior wooden door production process,Wood doors are wooden, inside and outside are. Logs are made of logs, timber directly broken raw materials. Beautiful materials, higher prices, lighter logs. Wood doors are made of natural logs, cut, gouged, drilled, cut …
Wood doors are wooden, inside and outside are. Logs are made of logs, timber directly broken raw materials. Beautiful materials, higher prices, lighter logs. Wooden doors are made of natural logs of wood, after cutting, planing, drilling, cutting, high-speed milling and other processing, after a scientific drying process. Wood door is a solid wood door series of high-end products, interior doors production process is what?

Interior wooden door production process

Interior wooden door production process: dry

The dry raw wood board (moisture content of about 60% to 70%) into the drying kiln for steam drying. The quality and thickness of the board is different, the drying temperature, time and settling time in different seasons. What is the production process of wood doors? The average time of steaming is about 15min, heating time and drying 25-30d, and drying board moisture content%. Dry steam heating is provided by the new 4t / h coal-fired steam boiler project. During the heating and drying process, the drying window of the drying kiln opens immediately, and the steam in the drying kiln is discharged according to the process control requirements.

Interior wooden door production process: punching

Cutting size for each additional 10mm, length and width; Description of wood materials, indicating the door combination. Frames are square and square, increasing in length and width. The width of the frame is 800-2000mm; dashboard, medium density fiberboard; the middle of all Landes hollow flower plate; lock wood can also be used as a lock box. What is the production process of wood doors? If you set the glass door, make sure the size and location of the glass.

Interior wood doors production process: hot

Each time you need to clean the workpieces and workpieces, you must ensure that they are free from impurities. Good hot pressing temperature and pressure will gradually enter the workpieces. The workpieces must be arranged in an orderly manner so that each part can be evenly loaded. Each possible heat Filling all the responsibilities, but also to ensure that each layer of each layer of the same thickness and cladding materials, decorative materials can not overlap, if not exceed the thickness of the workpiece completely filled applications. Wood door production process is to prevent glue drying. Each time the material is completed in two minutes, the machine will begin to be wrong and safe. After stamping the workpiece surface should be smooth, smooth, no glitches.

Interior wooden door production process: cold

Cold pressing process standard cold pressing time is determined by the temperature. The glue should be cured firmly. In the production process of the wood door, the surface of the component is smooth, clean, smooth, convex-free, and strong in texture.

Interior wood doors production process: fine cutting

Cutting error on both sides should not exceed 0.2mm Cutting standards: the production process of wood doors should be put into the workpiece before cleaning. Work should not be dislocated, should be aligned with the core, shall not be broken. The door should be tilted 2 degrees on both sides, the rest should be sawed straight, not scratched or percussion.

Check Also

Furniture quality inspection service in China

Wood Furniture manufacturing and raw materials 

Wood Furniture manufacturing and raw materials Different Door Surface Options   Door surface Feature Parameter …

Leave a Reply

Your email address will not be published. Required fields are marked *