Overlaid Veneer Plywood

Overlaid Veneer Plywood

 

Birch Plywood, mesh pattern/ smooth overlay
Quality/grade: both sides Phenolic resin overlay of 120 g/m²
Size: 1250/1500 mm x 2500 and 1500 mm x 3000 mm
Glue bond: BFU 100 / WBP / EN 314-2
Thickness (mm): 6.5 9 12 15 18 21 24 27 30
Plies: 5 7 9 11 13 15 17 19 21
Sheets per unit: 90 65 50 40 35 30 25 25 20
Asian Plywood, mesh pattern/ smooth overlay
Quality/grade: both sides Phenolic resin overlay of 167 g/m²
Size: 2500 mm x 1250 mm, 9 – 21 mm also 1500 mm x 3000 mm
Glue bond: WBP
Thickness (mm): 9 12 15 18 21 24 27 30
Plies: 7 9 11 13 15 17 19 21
Sheets per unit: 100 75 60 50 40 38 33 30
BIRCH MULTIPLEX MAXI, mesh pattern/ smooth overlay
Quality/grade: both sides Phenolic resin overlay
Size: 2150 x 3850 mm
Glue bond: BFU 100 / WBP / EN 314-2
Thickness (mm): 9 12 15 18 21 24 27 30 35 40
Plies: 7 9 11 13 15 17 19 21 23/25 27/29
Sheets per unit: 44 33 26 22 20 17 15 13 12 10
BIRCH MULTIPLEX MAXI Formwork
Quality/grade: smooth film both sides, Phenolic resin overlay of 220g/m² (440g/m² upon request), layed up of 1.5 mm birch veneers, jointed/solid one-piece veneers, edges sealed with waterproof paint, weight approx. 700 kg/m³
Size: 2150 mm x 3850 mm
Size/SPU: 21 mm / 20 sheets per unit
Glue bond: BFU 100 according DIN 68705 part 3, equiv. WBP according BS / EN 314-2
MOE bending // 9858 N/mm² ? 7642 N/mm²
Bending strength // 39.4 N/mm² ? 34.3 N/mm²
Taber values 700 for 220 g/m² 1500 for 440 g/m²
Birch Multiplex Maxi Formwork is the typical large-size form-panel as described in DIN 68792, high re-use factor, smooth concrete surface with reduced amount of joints due to large panel size.
Birch, smooth overlay both sides
Quality/grade: both sides Phenolic resin overlay of 120 g/m²
Size: 1500 mm x 3000 mm
Glue bond: BFU 100 / WBP / EN 314-2
Thickness (mm): 6.5 9 12 15 18 21
Plies: 5 7 9 11 13 15
Sheets per unit: 90 65 50 40 35 30
Additional sizes available up-on request
Asian Plywood, smooth overlay both sides
Quality/grade: both sides Phenolic resin overlay of 167 g/m²
Size: 2500 mm x 1250 mm, thickness 21 mm also 1500 mm x 3000/3600 mm
Glue bond: WBP
Thickness (mm): 4 8 12 15 18 21
Plies: 3 5 5 7 7 9/11
Sheets per unit: * * * * * *
Additional sizes and thickness available up-on request. *Number of sSheets per unit varies depending on manufacturer.
Isoplyform
Quality/grade: Fully laid-up of rotary-cut/peeled veneers of either Beech of 1.6 mm thickness or Birch of 1.4 mm thickness. The overlay consists of 1.6 mm thick, grey coloured, modified propylene sheets.
Sizes: 1350/1500 mm x 2700 mm and 1250/1500 mm x 2500 mm
Nominal thickness (mm) 12 15 18 21 24
Effective thickness (mm) 12 ± 0.3 15 ± 0.4 18 ± 0.4 20.7 ± 0.4 23.8 ± 0.4
Sheets per unit 50 40 35 30 25
Lay-up: The base panel is conventional, cross-wise laminated veneer plywood. The water-repellent overlay represents 3.2 mm of the panel thickness. The overlay material is fully recyclable, plain polypropylene, without any portion of cellulose or kraft-paper. This accounts for the low water absorption of maximum 1.8 %. Its Hardness is Shore D 75 – 80. Special sizes of up-to 1500 mm x 4000 mm and 2000 mm x 3000 mm, cut-to-size, custom overlay thickness and colour are available upon request.

Check Also

Pizhou,Linyi,China  Rotary Veneer

Rotary Veneer Species Mixed Meranti, Kapur, Keruing, MLH Grading Standards IHPA, JPIC Available Sizes 4′ …

Leave a Reply

Your email address will not be published. Required fields are marked *