China FILM FACED PLYWOOD TECHNICAL CHARACTERISTICS

FILM FACED PLYWOOD

DESCRIPTION

Multi-laminated pine plywood coated with phenolic film of 125 g/m² on both sides, glued with waterproof WBP phenolic resin, painted and sealed on the sides for indoor and outdoor use in assembling concrete forms for the construction of beams, slabs, pillars and foundations with the possibility of using 20 times or more (strictly following the norms for use and storing).

TECHNICAL CHARACTERISTICS

Measurements
Thickness: 12, 15 and 18 mm
Width: 1220 and 1250 mm
Length: 2440 and 2500 mm
Certifications
CE Mark
PS1-95
PNQM
Technical Characteristics
Boards 18 mm thick, 13 sheet layers with phenolic film of 125 g/m², sealed and painted on the sides.
Humidity ( % ): 10,9 ( +/- 0,3 )
Density ( kg/m3 ): 569 ( +/- 29 )

WARRANTY TERM

MOE – Modulus of Elasticity in bending strength ( N/mm2 ) ( MPa ):
Longitudinal 5960 ( +/- 490 ) / Transversal 5580 ( +/- 370 ).
MOR – Modulus of Rupture in bending strength ( N/mm2 ) ( MPa ):
Longitudinal 52,3 ( +/- 5,6 ) / Transversal 39,2 ( +/-6,1 ).
Gluing shear strength with immersion in water for 24 hours:
1,45 % (+- 0,36).
Gluing shear strength with immersion in boiling water:
1,48 % (+- 0,50).
Swelling: 3,4%
Water absorption: 51,6%
Formaldehyde released, norm EN 13986/04:
Class E1 (lower or equal to 3.5 mg/m² h).
Resistance to Taber Abrasion:
0.28 mm thickness reduction with 95% of wear on the proof sample.

Check Also

CARB /EPA certified E0 plywood production HOt pressing control

As The chinese Linyi and Xuzhou temperature is higher so much ,when making E0 GLUE …

Leave a Reply

Your email address will not be published. Required fields are marked *