Inspection checklist for furniture

Inspection checklist for furniture

http://www.cotecna-inspection.com/~/media/Consumer%20Goods/Documents/2012_Inspection%20checklist%20for%20furniture-sample.ashx?la=en

Cotecna Trade Services | www.cotecna-inspection.com | October 2012
Inspection checklist for furniture
AQL – Cr: Not allowed / Maj: 2.5 / Min: 4.0
Inspection
plan
Requirement Inspection
level
Cr Maj Min
Package /
packing
method
1. Complete, clean and correct
2. Appliance packed into materials to provide
protection against transport damage
3. Accessories are complete.
G-II * *
Sales
packaging
1. CE mark for Europe shipment missing
2. Required warning or marking missing
3. The warning must be in the official
language(s) of the country in which the product
is sold.
G-II *
Carton
surface
1. Print on the carton in accordance with the
specs (including barcode)
2. Shipping mark is OK (order no., item no., etc.)
G-II * *
Appearance 1. Surface without defects / scratches
2. No deformation
3. No sharp edges or points
4. Handle not cracked or loose
5. Base should not be convex or too concave
6. Colour deviation
7. Painting fade out
8. Pitted surface
9. Poor coating / painting / spraying / printing /
powder coating.
10. Exposed nail end
11. Incomplete rivet
12. Loose rivet
13. Protruding screw end / head
14. Slant rivet
15. Slipped screw
G-II * * *

Check Also

EN 13986 – European Standards EN 13986 , ,APAwood – Europe,

EN 13986 – European Standards EN 13986 , ,APAwood – Europe, EN 13986 +A1 2015 …

Leave a Reply

Your email address will not be published. Required fields are marked *