Door core boards are made from butt jointed Albasia timber strips. There are one single-layer core, and three-layer core. Three layers door core is three layers of butt jointed falcata stave cores sandwiched together in different parallel order to give it a stronger construction compared to a single layer panel board. Both sides are sanded finely to make sure uniform thickness and making it easy for the customers to put decorative materials on it.
Albasia Falcata is a fast growing tree which can be harvested within five to seven years, making it an economic material for producing wood panels such as the Eco-Core Falcata Blockboard. These trees grow well in both high and low rainfall areas on most types of land allowing for maximum efficiency in plantation restoration.
Eco-Core Falcata Blockboard Emission Rates:
Formaldehyde: 0.046 mg/m2/hr
Total Volatile Organic Compound: 0.006 mg/m2/hr
4-phenylcyclohexene: <0.003 mg/m2/hr
he Eco-Core Falcata Blockboard is available in the following sizes:
with 3mm MDF Faces
3030 x 1210 x 16, 18, 21, 28, 38, 40, 45, 50, 59 and 76mm thick
with 6mm MDF Faces
3030 x 1500 x 45, 50, 59 and 76mm thick
3030 x 1800 x 45, 50, 59 and 76mm thick
3600 x 1500 x 45, 50, 59 and 76mm thick
3600 x 1800 x 45, 50, 59 and 76mm thick
Thickness: ±1.0 mm
Length 3030mm: +0.00, -5.00mm
Width 1210mm: +0.00, -2.00mm
The 5 layer Triple Core Blockboard consists of 41mm wide Falcata strips bonded together and superimposed in a cross pattern and covered with a layer of MDF on each side.
The 3 layer Single Core Blockboard consists of 41mm wide Falcata strips bonded together to form one layer and covered with a layer of MDF on each side.
The boards are light weight – from 350 to 400 kg/m3 depending on the thickness, it is approximately half the weight of MDF. The Falcata Blockboard hold screws very well and is strong and stable due to its construction.
The thicker boards are typically used for internal doors, sliding doors, pivot hinged doors, large conference and meeting tables, long span shelving or high quality joinery/furniture.
It is used as a substrate material suitable for re-veneering or laminating.
Blockboard is a wood-based panel made up of Albasia Falcata Core and veneer sheets. It has good screw holding capability and also resistant to warping which makes it an excellent material for applications such as partition walls, doors, tables and shelves.
|Country of Manufacture||Indonesia||Size (mm)||18 × 1220 × 2440|
|Number of Plies||3 or 5||Tolerance||+/- 0.2 mm|
|Grade||OVL, BB/CC or UT||Moisture Content||10 – 12%|
|(Cross Section of a Blockboard)
3 Ply Blockboard
5 Ply Blockboard
A – Albasia Falcata Core
B – Veneer sheets
- Thickness: 25 – 54 mm
- Width: 650 – 1030 mm
- Length: 1870 – 2350 mm