Daily Archives: 1 week ago

3.6mm WBP Plywood Inspection and QC test

3.6mm WBP Plywood Inspection and QC test It is used to make templates and mock ups, drawer bottoms and the insides of cabinet boxes where appearance is not important.     It can also be used for veneer core platforms for laying up fancy veneer faces on. There are actually many species …

Read More »

2.7mm Hardwood Plywood Inspection and QC test

2.7mm Hardwood Plywood Inspection and QC test Inspectors or graders should check : 1.Plies of the core structure ,3 plies ,4 plies 2.Face wood species and grades 3.Back wood spcies and grades 4.Check if Plywood breaks easily. 5.Core veneer wood species Most of the time ,this kind of thin plywood …

Read More »

2.7mm Plywood Inspection and QC test

This 2.7mm Plywood panel is produced using a mix of Chinese wood species. Available in two thicknesses, 2.4 and 2.7 mm, that together with its content weight, make it ideal for caravan interior furnishing. The 2.7mm has two types of core constructure ,one is 3 plies ,another is 4 plies including face …

Read More »

OSB panels (OSB/2, OSB/3, OSB/4) Inspection and QC test

OSB panels (OSB/2, OSB/3, OSB/4) Inspection and QC test OSB panels (Oriented Strand Boards) are high-efficiency wood materials in terms of resilience and bending strength. The water-resistant and glued multylayer boards are produced out of long and thin strands. The strands which are cut alongside out of debarked round wood get …

Read More »