Anti-Slip Wiremesh FILM FACED PLYWOOD Inspection
Exterior plywood coated on one or both sides with phenolic film with a net imprint. That gives the plywood anti-slip properties and ensures higher durability and resistance to abrasion.
When inspect the Anti-Slip Wiremesh FILM FACED PLYWOOD ,most of the key points are similar like regular film faced plywood ,just four new extral points need to check :
1.The wiremesh model ,means what kinds of Slippery types surfaces
2.Anti-slip one side or two sides, smooth/wiremesh film faced ,Anti slip – wiremesh/wiremesh
3.Film surface types : Diamond, square, or round, or diamond, and the size and depth of the shape.Anti–slip surface and a diamond or teardrop pattern
4.How many layers of film for the wiremesh surface, decide the final film faced plywood hot pressing plates quality .
5. Core veneer wood species ,normally used birch or eucalyptus ,not poplar ,poplar is too soft .
如无特殊说明，文章均为本站原创，转载请注明出处。If there are no special instructions, the articles are original, if you want to use or reproduce, please indicate the original source www.plywoodinspection.com,If you find that our article infringes on your rights and interests, please email us in time and we will delete it at the first time.