Appearance quality control of Particleboard

Appearance quality control of Particleboard

Abstract: the quality of particleboard products mainly includes appearance quality and physical and mechanical properties. From the production practice of our factory, the lack of appearance quality is the most important factor that causes the product degradation, and the proportion of non-A pole is usually more than 80%.

The defects of appearance quality of particleboard mainly include: loose edge, rough surface particleboard, dent, poor surface curing, loose structure, glue spot, uneven saw edge and missing angle.

Key words: appearance quality, physical and mechanical properties, pre curing layer, surface curing, loose edge, rough planing and hot pressing time of slab particleboard production line

如无特殊说明,文章均为本站原创,转载请注明出处。If there are no special instructions, the articles are original, if you want to use or reproduce, please indicate the original source,If you find that our articles infringe on your copyrights and interests, please email us at in time and we will delete it at the first time.

Check Also

P3 MOISTURE RESISTANT CHIPBOARD inspection,quality control ,sourcing and testing

A versatile and cost-effective chipboard with many uses. A slightly denser and stronger particleboard with …

Leave a Reply

Your email address will not be published. Required fields are marked *