Benchmark Product Certification Construction and Building Material Products Construction Standards Product Certification brochure

Looking to get your Construction product onto the market?

https://www.bsigroup.com/en-AU/Benchmark-Product-Certification/Construction/

Getting your construction and building material onto the market is one of the most daunting challenges you can face. There are all sorts of regulations in place, and the requirements are unclear. But whether it’s glass, windows, plywood, insulation, tanks and more, we can help make everything clear. There are four steps to getting your product certified:



Step 1: Find the right Standard

Your intended customers need assurance that your factory is manufacturing products that comply with the material, processing and testing requirements of the applicable standard. Many construction material standards (industry, regional, national and international) are in use around the world. It is critical that your product complies with the standard for the market you are targeting.

You can select from the Construction standards listed below. You can also contact us on 1300 730 134, or submit an on-line enquiry, so that our Construction experts can guide you on which standard best applies to your product and intended customers.


Step 2: Get your product tested

Representative samples of your product will need to be tested to prove compliance with the governing standard.

Our technical experts can advise you on the number of samples required and propose suitable test faclities for preliminary testing and for testing of the complete product range. The tests typically are standard for a variety of similar products and check for safety and durability, as well as fitness for purpose.

You can enagage the test facility of your choice however it is essential that the test facility is properly accredited to undertake the specific tests required by the standard. Testing can be conducted by the BSI UK Testing Laboratories, or at other NATA or ILAC registered laboratories.


Step 3: Site assessment

Once product testing is complete, BSI reviews and advises on the test results and test report. One of our expert Client Managers will visit your factory to determine if your management and processes are capable of consistent product manufacture and that the final product complies with the applicable standard. The Client Manager assesses your quality management system (QMS) which must meet requirements for critical actiivities such as training, process checks, equipment calibration, communication, handling of non-conformances. Our Quality System specialists can guide you in this regard. After each assessment you will receive a confidential report detailing the scope and findings of your assessment as well as Client Manager recommendations.


Step 4: Certification and beyond

If your product passes the testing and your factory passes the assessment, your product will be certified. This will allow you to distribute your product into the market. You will be issued a certificate which authorises your business to affix the BSI Benchmark Logo on your products and company literature.

Annual surveilance audits must occur to maintain product certification. Re-audit is usually necessary when there have been changes to the product design, use, method or place of manufacture, or when new standards become applicable, or when new products are added to the range.



如无特殊说明,文章均为本站原创,转载请注明出处。If there are no special instructions, the articles are original, if you want to use or reproduce, please indicate the original source www.plywoodinspection.com,If you find that our articles infringe on your copyrights and interests, please email us at info@plywoodinspection.com in time and we will delete it at the first time.

Check Also

Good plywood suppliers are trained, SQE and purchasing must read

Good plywood suppliers are trained, SQE and purchasing must read Continuous acquisition of high quality, …

Leave a Reply

Your email address will not be published. Required fields are marked *