CAN/AM GOLD+™ is a value-priced professional grade plywood . North American-made and CARB Phase 2 compliant, this product will fill your need for a low cost plywood panel to round out your construction options.
These CAN/AM GOLD+ panels offer more consistent quality, less thickness variation, thicker faces, less telegraphing as well as reduced warping and moisture problems than many imported or domestic low-cost alternatives.
The Veneer Core is made with alternating veneer inner plies. In North America, the innerply species are usually softwood (fir or pine) on the west coast and poplar or aspen on the east coast.
Veneer core panels are relatively light in comparison with composite panels, typically weighing about 70 lbs. per 3/4″ panel. Veneer core offers great strength and stability with better spanning properties than either particle board or medium density fiberboard (MDF). Veneer core does have a wider variance in thickness in comparison with highly engineered PBC or MDF.
- 4 x 8 CAN/AM GOLD+ plywood panel
- North American made
- Improved yield: less waste due to problems like warping, thickness variation, delamination & poorly patched plies
- Faces pre-sorted for uniformity: #4 balancing back with open knot holes and splits, can be used for lowest cost needs applications
- Formaldehyde-free: Made with soy-based technology
如无特殊说明，文章均为本站原创，转载请注明出处。If there are no special instructions, the articles are original, if you want to use or reproduce, please indicate the original source www.plywoodinspection.com,If you find that our articles infringe on your copyrights and interests, please email us at firstname.lastname@example.org in time and we will delete it at the first time.