Adhesive and Glue

EPA TSCA TITLE VI https://www.compositepanel.org/ The EPA’s national formaldehyde regulation, known as TSCA Title VI, is widely recognized as the most stringent formaldehyde emissions regulation of composite wood in the world today. It implements “The Formaldehyde Standards for Composite Wood Products Act,”, a bipartisan, bicameral law passed in 2010 that …

NAF/ULEF No-added formaldehyde (NAF) or ultra-low emitting formaldehyde (ULEF) products. The California Air Resources Board (CARB) has issued these facilities an executive order approving the use of NAF/ULEF resins, and they meet all the requirements of CARB ATCM 93120 and EPA TSCA Title VI under the oversight of a third-party …

Types of plywood glue （1） According to the different composition of the glue, there are several kinds of glue for building plywood as follows: Urea formaldehyde glue: moisture-proof glue / used for interior decoration and furniture, not for outdoor use. Melamine glue: dampproof, water resistant, climate resistant / can be …

Formaldehyde of two batches of birch plywood in Vietnam exceeds the standard Recently, it was learned from one plywood trading company in Vietnam that in the second half of this year, Some of the U.S. plywood importers randomly inspected 30 batches of products produced by three enterprises, including two batches …

Plywood Specifications – Gluelines Type A Bond Produced from a Phenol Formaldehyde (PF) resin, which sets permanently under controlled heat and pressure. This forms to create a permanent bond that will not deteriorate under wet conditions, cold or heat. This bond is recognisable by its distinct black colour. Type A …

By adding special additives to the resins used during impregnation, we are able to adapt and optimise products to suit the specific requirements of our customers. Thus, production parameters, transportation characteristics or product properties, such as resistance to heat and water or cut resistance, can be adjusted to create a …

MUF (Melamine Urea Formaldehyde).

MR (Moisture Resistant) Using Non-Water Resistant Adhesive – this type of plywood is suitable for interior use.

WBP (Weather & Boil Proof) Using Water Resistant Adhesive – this type of plywood is suitable for both interior and exterior use.

GLUE Types for wood panels CARB 2, MR – Type II – Interior, LFE – Low Formaldehyde Emission, Melamine Type 1 Exterior, WBP – Phenolic Type 1 Exterior, EPA TSCA Title VI / CARB2 Phenolic glue Interior glue PLYWOOD CLASSES F 4 Star (F4* F) / Super E Zero (Super …