Core Veneer

Core Veneer

VENEER CUTS TYPES

VENEER CUTS P.S. (Plain Sliced) / (F.S. – Flat Sawn) – The log is cut in half, slicing is done parallel to a line through the center of the log opposite the heart, generating a variant R.C.(Rotary Cut) – The cut follows the log’s annular growth rings; veneer is exceptionally …

Read More »

Density and species of timber veneer 

Density and species of timber veneer The density of plywood and LVL is approximately equivalent to the density of the timber species used to manufacture the product. The density of pine plywood is in the range 500 – 650 kg/m3. Eucalypt hardwood plywood density can exceed 900 kg/m3 depending on …

Read More »

Wood veneer edge banding

Wood veneer edge banding is the perfect finishing touch to veneered edges and panels. Made from real wood, the sheets are expertly joined to create a continuous roll of ready to use trim. A number of popular species, and can special order any exotic species available on the market. Edge …

Read More »

WOOD VENEER TERMINOLOGY

WOOD VENEER TERMINOLOGY 10 Mil PaperbackA reference to the paper backing applied to sheets of flexible veneer. A single mil thickness is .001″ so in this example the backing paper is a nominal .010″ thick. 20 Mil PaperbackA reference to the paper backing applied to sheets of flexible veneer. A …

Read More »

RECONSTITUTED VENEER

Reconstituted veneer is a type of man-made wood veneer. It is an environmentally friendly alternative to expensive rare and exotic wood species. Reconstituted wood veneer is created with consistency using real wood from natural, renewable sources. It mimics your favorite wood veneer species and is free from natural defects. This …

Read More »

Basswood based Veneer

Basswood based Veneer length 2500-3150 mm width 360 mm, from 620 to 700 mm Please note that special dimensions can be manufactured on request Nominal thickness available / Thickness from 0,42 mm to 2.8 mm Not all producs are available in all the above thicknesses. Dimensional Manufactoring Tolerances / Width -0/+30 mm

Read More »

Ayous based Veneer

Ayous based Veneer length 2200-2500-2800-3150 mm; width 360 mm, from 620 to 1260 mm Please note that special dimensions can be manufactured on request Nominal thickness available /Thickness from 0,42 mm to 2.8 mm Not all producs are available in all the above thicknesses. Dimensional Manufactoring Tolerances /Width -0/+30 mm Thickness complies …

Read More »

Poplar Core veneer

Poplar Core veneer is normally from China and Europe .China poplar core veneer is heavier than europe poplar veneer . Poplar based Veneer are normally used in the chinese plywood production or export to Far east asia such as malaysia ,vietnam and indonesia for plywood production . Standard dimensions available  …

Read More »

Styrax Core Veneer

Styrax Core Veneer Short Grain styrax core veneer , Origin : vietnam Size: 1270 x 640 x 1,7mm or 1270 x 640 x 2,1mm + Moisture Content: Under 20% with Air Dried and Under 14% with Kiln Dried + The quality: 100% Grade A and Mixed B grade

Read More »

Acacia Core Veneer

Acacia Core Veneer Acacia core veneer Origin : Vietnam VENEER SIZE: 1270mm x 640mm, 1270mm x 820, 640 x960,640mm x1270, VENEER THICKNESS: 1.6 / 1.7 / 1.8 / 2.0 / 2.1 / 2.2 mm VENEER MOISTURE: 15%-18% VENEER GRADE: 90%A-10%B, 80%A- 20%B, 100% B

Read More »