Machinery

Machinery

Glue spreader for plywood production

Glue spreader is the specialist to spread the glue uniformly on (core) veneers. Increasing the utilization of glue and decreasing and minimize glue consumption. Equips with high quality rubber glue rollers and chromate treatment doctor rollers. The glue spreads evenly it helps the veneer stick rigidly precise. The safety device …

Read More »

Plywood platform Core Sander

Plywood platform Core Sander Bad quality from lathe produces uneven thickness of core veneer due to the outorn plywood.Core sander can increase the re-usable ratio of veneer. Raising recovery from small diameter log and bad quality log. Cost too much time in repair work of thin plywood such as overlap. …

Read More »

Double Face Glue Spreader

GLUEING AVERAGE AND GLUE SAVING: Roller all under professional precision treatment and balance treatment and balance revised. So will make the spray more even and sane glue. CONVENIENCE: The special adjusting mechanism of rubber and doctor roller with pneumatic cylinder. When it insert to the clearance either between the glue …

Read More »

Plywood Cold press (Pre press) Machinery

Plywood Cold press (Pre press) Machinery Cold press (Pre press) Plywood can be made effectively without trouble from high moisture veneer.. Troubles inside hot press caused by turning of veneer and produced rate of inferior plywood were remarkably decreased and as a result, operation rate of hot press was raised …

Read More »

Plywood Sanding Machine

Plywood Sanding Machine Machine This plywood sanding machine suits for polishing lumber core plywood, multilayer board, clip board and integrated board of furniture, bamboo floor, wood window and door, handiwork, glass fibre reinforced plastic, wood-plastic composite etc. The plywood sanding machine adopts modularity design. They can be combined optionally and satisfy different customers’ …

Read More »

Plywood Hot Press Machine

Plywood hot press machine is the main machine in plywood production line, it is important for plywood quality, so the quality of hot press machine is very important. Plywood hot press machine can press veneers together with high temperature. Which is used in furnitures and artificial board secondary operation. Manual and …

Read More »

Plywood Cold Press

Plywood Cold press machine is also called pre-press machine, which is the auxiliary machine in plywood production line, which is used to shorten the cycle time of hot press and improve the quality of plywood before gluing plywood. Cold press machine belongs to the pressing machine.Plywood Cold press machine is mainly used to press …

Read More »

Veneer Glue Spreader

Veneer glue spreader is made by steel with solid and sturdy structure.The gap between spreading rolls and squeezing rolls can be adjusted freely by hand-wheels. Two spreading rolls are made of rubber covering with treated surface. The pressure and the quality of glue can be regulated by pneumatic system according …

Read More »

Veneer Composer

Core veneer composor (jointer)  machine is suitable for core veneer joining together in plywood production line and it can process different sizes of core veneer (poplar, eucalyptus wood, etc.) with high strength thread and hot melt adhesive connection as one whole body, then facilitate the subsequent stages of production of …

Read More »

Veneer Dryer

Veneer dryer is suitable for drying the core veneer with the thickness from 1.0mm to 6.5mm. Core veneer dryer is a fixed, but it is very easy to operated. Only need loading the wood veneer manual and uploading wood veneer manual. Main Features of Veneer Dryer:  The use of aircraft …

Read More »