Quality Control

Quality Control ,Quality control (QC) is a procedure or set of procedures intended to ensure that a manufactured product or performed service adheres to a defined set of quality criteria or meets the requirements of the client or customer. QC is similar to, but not identical with, quality assurance (QA).

Face veneer Tips of Hardwood Plywood

Face veneer Tips of Hardwood Plywood Know how to judge the face side of hardwood plywood. Select the showing side of panels according to color first, grain second, and veneer splices last. 1.uniform veneer coloring 2.color variation 3.sapwood  and heartwood 4. straight grained, plain sliced 5.Splices, fewest number of splices are …

Read More »

Edges of plywood straight and square inspection and Test

Edges of plywood straight and square inspection and Test 1.Diagonal measures 5′ at the 3′ mark of a 4′ wide sheet of plywood, then the corner is square. Just remember: Not all plywood is exactly 4′ wide.This is based on the right-angled principle. 两条直角边的平方和等于斜边的平方。 The sum of squares of two …

Read More »

CUT TO SIZE Plywood inspection and QC checklist

CUT TO SIZE Plywood inspection and QC checklist 胶合板锯开之后,尺寸要精确,长度和宽度精准,不能有开胶分层的现象,锯开之后的四边的厚度要一致,厚度公差要一致,芯板层次清晰,严格控制叠芯和离芯,不能有锯齿和黑色的糊边现象,边部不能起皮,切割胶合板,不能有切口位置崩边, 胶合板不能有变形或者翘曲。 After the plywood is sawed, the size should be precise, the length and width should be precise and quite accurate. , and there should be no delamination. After sawing, the thickness of the four plywood sides should be the same, the thickness tolerance …

Read More »

Marine Plywood (BB/CC) Inspection and QC checklist

Marine Plywood (BB/CC) Inspection and QC checklist Marine Plywood (BB/CC) – bonded with undiluted Phenol Formaldehyde Resin at high temperature and pressure for exterior applications.       –  Marine Plywood (Manufacturer Declared)              –  Marine BS1088 Plywood (Q-Mark Certified) Not all marine plywoods are the same.  Use quality plywood as it is rated …

Read More »

Technical Information (WBP Plywood)INspection and QC checklist

Technical Information (WBP Plywood)INspection and QC checklist Technical Characteristics (Average) Property Unit Mean Value Test Method BSI Standard Reference Bonding Quality Pretreatment 5.1.1 N/mm2 1.17~1.92 Immersion 24 hours in water 20oC & Pull Test  EN314-1:1993 Apparent Wood Failure % 25 Pretreatment 5.1.4 N/mm2 1.00~1.43 Immersion 72 hours in boiling water …

Read More »

OPTIMAL HANDLING OF FILMFACED PLYWOOD

OPTIMAL HANDLING OF FILMFACED PLYWOOD Proper handling instructions – so clients can bring the best out of our filmfaced plywood:  Sealing of the edges The edges of plywood panels coated with special paint are sealed at the factory. It is very important that panels edges are kept sealed. They should …

Read More »

 FILM-FACED PLYWOOD QC checklist and INspections

FILM-FACED PLYWOOD QC checklist and INspections Dimensions 2500 x 1250 mm / 1250 x 2500 mm Thicknesses 15/18/21 mm Tolerances length/width +/- 2 mm Type of surface both sides smooth or one side wiremesh / one side smooth Film surface (standard) 120 g/sqm, dark-brown Edge protection water-proofed sealing Wood type …

Read More »