COLORED FILM FACED PLYWOOD INSPECTION,quality control,testing and Sourcing

Colored film-faced plywood is lightweight and resistant to corrosion attack and detergents. This material is simple to process and can easily be combined with other materials. Colored film-faced plywood is mainly used in high temperature drop conditions, in areas with moisture and is therefore a great material for open conditions.

Colored film-faced plywood is made of Northern wood which ensures the durability of the panel whereas damage resistance is ensured by high-quality import film coats on the panel. Highly water-and wear resistant colored film-faced plywood is achieved by painting the edges of the plywood with waterproof paint and film-facing it.

All of the above mentioned qualities of colored film-faced plywood make this material excellent to use in many different areas.

The film-faced panels water-and-wear resistant surface makes it a good material to use for stadiums, event constructions, children playgrounds. Since colored film-faced plywood is water-and-wear resistant, ecologically safe and resistant to detergents this material finds good use in packing manufacture.

As the name colored film-faced plywood says there are many different colors that this material comes in. Therefore it is highly appreciated also by the furniture industry. This material finds use in furniture manufacturing, interior decoration and so on.

Specification according to TU 5512-002-44769167-98
Dimensions, mm 2500 х 1250, 1250 x 2500
Thickness, mm 6, 9, 12, 15, 18, 21, 24, 27, 30.
Tolerance on length (width) +/- 2mm
Grade of face veneer 1, 1/2, 2
Number of plies from 5 up to 21 depending on thickness
Surface color in assortment
Edges processing by waterproof acrylic paint
Basis birch plywood
Formaldehyde emission class E1 (up to 8 mg per 100g of bone dry plywood)
Water resistance WBP mark
Moisture content, max 5-12 %
Ultimate shearing strength not less 1.5 MPa (birch base), not less 1.0 MPa (KOMBI base)
Ultimate tensile strength not less 40 MPa
Ultimate creasing strength not less 60 MPa
Certification DIN 68705-3, EN 13986, EN 636-3, Russian hygienic certificate (WBP only), Russian standard GOST


如无特殊说明,文章均为本站原创,转载请注明出处。If there are no special instructions, the articles are original, if you want to use or reproduce, please indicate the original source,If you find that our articles infringe on your copyrights and interests, please email us at in time and we will delete it at the first time.

Check Also

F14 Structural Form Ply Inspection,grading,quality control,sourcing ,manufacturing

    Premium Form F14 Structural Form Ply – achieve concrete forming that results in …

Leave a Reply

Your email address will not be published. Required fields are marked *