Concrete Forming Plywood inspection and QC checklist

Concrete Forming Plywood inspection and QC checklist

When do the Concrete Forming Plywood inspection, first ,know something about the Concrete Forming Plywood,  Selecting the proper plywood for concrete formwork is essential. When specifications call for a specific surface finish or you need to obtain a certain number of pours without having to replace the plywood panels, it’s critical to choose the right product. There are several options, but in simplistic terms there are four categories; Phenolic Surface Film (PSF) also called film faced plywood , High Density Overlay (HDO), Medium Density Overlay (MDO), and Plyform (BB-OES).

Regardless which formwork plywood selected, remember that surface finish and panel life is predicated upon proper care and maintenance. Periodic cleaning of the form panels, using a forming oil or release agent, and being careful not to over vibrate the concrete mixture, will all enhance the life of the plywood and reduce the possibility of imperfections on the concrete surface.

Two most important Checklist before inspection :

1.Specifications

2.Surface finishes

 

如无特殊说明,文章均为本站原创,转载请注明出处。If there are no special instructions, the articles are original, if you want to use or reproduce, please indicate the original source www.plywoodinspection.com,If you find that our article infringes on your rights and interests, please email us in time and we will delete it at the first time.

Check Also

QUALITY INDICATORS FOR LAMINATED CHIPBOARD PB AND MFC

QUALITY INDICATORS FOR LAMINATED CHIPBOARD PB AND MFC

  QUALITY INDICATORS FOR LAMINATED CHIPBOARD PB AND MFC Chipboard –  board material fabricated by hot …

Leave a Reply

Your email address will not be published. Required fields are marked *