Door Blanks inspection ,quality control and sourcing

Fire Check Door Blanks for Safety & Security.

Fire Check Doors

Flamebreak – Lightweight

Half Hour Rated

One Hour Rated

Door Blanks which being manufactured with solid timber cores may be recut to size with out reducing the structural integrity.

Choice of two thicknesses: -.

44mm Thick for 30 min / 0.5 Hour application

54mm Thick for 60 min / 1 Hour application


Suitable Fire Rated doorframes and doorstops must be used together with intumescent and or smoke seals if applicable in order to comply with regulations.

It is also recommended that an appropriate hardwood lipping be applied to the four edges to completely seal them against the elements when installing as an exterior access door. These doors are suitable for paint finishing.

Common uses: –

External access / exit doors

– Solid core gives greater security when used with Hinge Pins and other security measures –

Fire Rated Doors for External locations Fire Rated Doors in internal locations

Extra Heavy Duty Work Table Tops

Stock sizes are: –

Light Weight Fire Check Door Blanks (Flamebreak)

2135mm x 915mm x 44mm Half Hour Rated

2135mm x 915mm x 54mm One Hour Rated

Fire Check Door Blanks

2440mm x 1220mm x 44mm Half Hour Rated

2440mm x 1220mm x 54mm One Hour Rated

如无特殊说明,文章均为本站原创,转载请注明出处。If there are no special instructions, the articles are original, if you want to use or reproduce, please indicate the original source,If you find that our articles infringe on your copyrights and interests, please email us at in time and we will delete it at the first time.

Check Also


Woodgrain Embossed A fusion of high density fiberboard (HDF) moulded door skin and the fashionable …

Leave a Reply

Your email address will not be published. Required fields are marked *