Dot Birch Plywood  inspections and QC GRADING

Dot Birch Plywood overlaid with a phenol, UV resistant or melamine film on both faces. The wear face has a special surface pattern (WT). Pattern gives dot effect. The reverse face usually is smooth (F).

Filmcolour:

Phenol films: dark brown 120 and 220 g/m2, black 120 g/m2 , light brown 120 g/m2, yellow 167 g/m2

UV resistant films: dark grey 220 g/m2, light grey 220 g/m2, white melamine 200 g/m2, opal white 174 g/m2

Under transparent films BB grade veneer can be applied.

Applications:

Transport industry, finishing of walls and ceilings, industrial furniture: components, shelving system and table tops, shop fitting, exhibition stands, booths, advertisement and information boards.

Advantages:

Environmentally friendly, durable, easily workable, hygienic, odour free, easy-to-clean, wear resistant, weather- and water-proof, resists commonly used chemicals.

Furtherprocessing:

Plywood can be machined with wood working tools: cutting, drilling, milling, jointing in length, tongue and groove (T&G), half laps, profiled edges etc.

Overlaying:

A matt phenol, UV resistant or melamine film, which is hot-pressed onto the surface, is used as an overlay. The phenol film is composed of a basic paper which is impregnated with phenol resin. The UV resistant film is impregnated with a special thermosetting mixture of polymers containing amino resins. The melamine film is a modified resin based film with improved crack resistance for the decorative lamination of plywood. Overlaying with higher resistance to abrasion and multi-layer overlaying is also possible (respectively 240 g/m2; 440 g/m2, etc.). Multi-layer overlaying gives superior wear resistance.

Sizes:

1220 mm x 2440 / 3050 mm
1250 mm x 2500 / 2750 / 3000 mm
1500 mm x 2500 / 3000 mm
1525 mm x 2750 / 3050 mm
3150 mm upon special request

Cut-to-size panels and machined panels available in accordance with the customers’ requirements.

Thicknesses:

6.5, 9, 12, 15, 18, 21, 24, 27, 30, 35 mm. 

如无特殊说明,文章均为本站原创,转载请注明出处。If there are no special instructions, the articles are original, if you want to use or reproduce, please indicate the original source www.plywoodinspection.com,If you find that our articles infringe on your copyrights and interests, please email us at info@plywoodinspection.com in time and we will delete it at the first time.

Check Also

Requirements on substrate treatment for installation of film faced plywood

Requirements on substrate treatment for installation of film faced plywood During the installation of film …

Leave a Reply

Your email address will not be published. Required fields are marked *