DRAWER BOXES & CUSTOM INSERTS Grade Plywood quality control and inspection

DRAWER BOXES & CUSTOM INSERTS Grade Plywood quality control and inspection

Original Source please visit http://coronamillworks.com

DRAWER BOX CONSTRUCTION METHODS

DOVETAIL CONSTRUCTION

Feature a series of pins cut to extend from the end of one board to interlock with a series of tails cut into the end of another board. Once glued, a wooden dovetail joint requires no mechanical fasteners.

dovetailbox

DOWELED CONSTRUCTION

Doweled construction offers good quality at a very affordable price. Another benefit is that doweled drawer boxes can be flat-packed for easy shipping and on-site assembly.

dowelbox

DRAWER BOX SIDE OPTIONS

ANGLED SIDES

STANDARD SIDES

SCALLOPED SIDES

AVAILABLE DRAWER BOX MATERIALS

SIDE MATERIALS

Pre-Finished Plywood

  • 1/2″ 9-Ply Baltic Birch
  • 5/8″ 11-Ply Baltic Birch
  • 1/2″ Multi-Ply Maple
  • 5/8″ Multi-Ply Maple

Unfinished Plywood

  • 1/2″ 9-Ply Baltic Birch
  • 5/8″ 11-Ply Baltic Birch
  • 1/2″ Multi-Ply Maple

Solid Wood (Finishing After Assembly Available)

  • 1/2″ or 5/8″ Alder
  • 1/2″ or 5/8″ Aspen
  • 1/2″ or 5/8″ Beech
  • 1/2″ or 5/8″ Cherry
  • 1/2″ or 5/8″ Maple (Select White)
  • 1/2″ or 5/8″ Maple (Soft)
  • 1/2″ or 5/8″ Oak (Red)

Melamine (Available in Dowel Construction Only)

  • 1/2″ Almond
  • 1/2″ Black
  • 1/2″ Maple
  • 1/2″ or 5/8″ White
  • 1/2″ White (with MDF core)

BOTTOM MATERIALS

Pre-Finished Plywood

  • 1/4″ or 1/2″ Baltic Birch
  • 1/4″ or 1/2″ Maple

Unfinished Plywood

  • 1/4″ or 1/2″ Alder
  • 1/4″ or 1/2″ Beech
  • 1/4″ or 1/2″ Birch
  • 1/4″ or 1/2″ Cherry
  • 1/4″ or 1/2″ Maple
  • 1/4″ or 1/2″ Oak (Red)

Melamine

  • 1/4″ or 1/2″ Almond
  • 1/4″ or 1/2″ Black
  • 1/4″ or 1/2″ Maple
  • 1/4″ or 1/2″ White

TOP EDGE TYPES

  • Bullnose
  • Square
  • Square Flush

TOP EDGE FINISHES

  • Clear Foil
  • PVC Tape
  • Wood Tape

NOTCH, DRILL, & CLIP INFORMATION

FEATURES

  • Clips Available From: Blum, CMW, Grass, Hettich, & Salice
  • Wide Range of Undermount Slides Available
  • Concealed Undermount
  • Easy Box Installation and Removal
  • Increased Drawer Strength and Weight Capacity

UNDERMOUNT DRAWER SLIDE SPECIFICATIONS

OUTSIDE DRAWER WIDTH = DRAWER OPENING (-) SUBTRACTION FACTOR

To calculate Outside Drawer Width, first determine Drawer Opening size and Drawer Side Thickness. Use Thickness to look-up Subtraction Factor on chart below. Then simply subtract Subtraction Factor from Drawer Opening size.

Side Thickness:

5/8″ (16mm)

9/32″ (15mm)

9/16″ (14mm)

1/2″ (13mm)

15/32″ (12mm)

Subtraction Factor:

3/8″ (10mm)

15/32″ (12mm)

9/16″ (14mm)

5/8″ (16mm)

23/32″ (18mm)

For Example: If you have an 18″ Drawer Opening with a Side Thickness of 5/8″, the Subtraction Factor is 3/8″. So in this case to calculate the outside drawer width the formula is: 18″ – 3/8″ = 17-5/8″.

如无特殊说明,文章均为本站原创,转载请注明出处。If there are no special instructions, the articles are original, if you want to use or reproduce, please indicate the original source www.plywoodinspection.com,If you find that our articles infringe on your copyrights and interests, please email us at info@plywoodinspection.com in time and we will delete it at the first time.

Check Also

Types of Plywood (Home Depot ) inspection,quality control ,sourcing ,testing 

Types of Plywood https://www.homedepot.com/c/ab/types-of-plywood/9ba683603be9fa5395fab909d37f448 Plywood is ideal for applications in residential and light-duty construction and …

Leave a Reply

Your email address will not be published. Required fields are marked *