Elliotis Pine Structural Plywood 2440 x 1220 x 18mm
C+ / C CE2+
Developed specially for industrial application where thickness tolerances are critical, these panels may also be used as concrete shuttering panels, as well as for roof decking, floor decking and wall sheating.
Developed to perform with excellence as floor decking, these panels also fit very well for industrial applications, where a solid surface is required. Such solid surfaces also allow these panels to perform very well as concrete shuttering boards if properly treated with release agents.
C+ / C CE4
Created to offer the Best performance at the lowest cost, these panels are repaired and sanded one face, the reverse may show some open defects. They provide the perfect solution for general non-structural applications.
B / C
A strutuctural panel with a majority solid wood face (one good side). All repairs wider than 5mm are made using all wood patches. This panel is a very good option for several use where strenght and a solid nearly all wood suface are required, like for painting or veneering with thin natural vaneers.
Sheating (C / C CE2+)
Created to offer the best performance at the lowest cost, these panels have rough finishing on both faces and may show some open defects. They provide the perfect solution for general structural applications.
B / B O&ES
A strutuctural panel with a majority solid wood face. All repairs wider than 5mm are made using all wood patches. This panel is sealed with mineral oil, becomming an excelente option for concret formwork.
T & G
Upon request, the panels B / C, C+ / C CE2, CPC and Sheating (C / C CE2+) of 18mm may be delivered with T&G (tongue and grooved) machined profiles on the long edges (upon request also 4 sides). T&G panels are especially recommended for floor and roof decking applications to obtain na increased point…