Falcata Blockboard Inspection and QC Checklist

Falcata Blockboard Inspection and QC Checklist

Albasia Falcata is a fast growing tree which can be harvested within five to seven years, making it an economic material for producing wood panels such as the Falcata Blockboard. These trees grow well in both high and low rainfall areas on most types of land allowing for maximum efficiency in plantation restoration.

Falcata Blockboard is available in the following sizes:

with 3mm MDF Faces

3030 x 1210 x 16, 18, 21, 28, 38, 40, 45, 50, 59 and 76mm thick

with 6mm MDF Faces

3030 x 1500 x 45, 50, 59 and 76mm thick
3030 x 1800 x 45, 50, 59 and 76mm thick
3600 x 1500 x 45, 50, 59 and 76mm thick
3600 x 1800 x 45, 50, 59 and 76mm thick

PANEL TOLERANCE:

Thickness: ±1.0 mm
Length 3030mm: +0.00, -5.00mm
Width 1210mm: +0.00, -2.00mm

The 5 layer Triple Core Blockboard consists of 41mm wide Falcata strips bonded together and superimposed in a cross pattern and covered with a layer of MDF on each side.

The 3 layer Single Core Blockboard consists of 41mm wide Falcata strips bonded together to form one layer and covered with a layer of MDF on each side.

The boards are light weight – from 350 to 400 kg/m3 depending on the thickness, it is approximately half the weight of MDF. The Falcata Blockboard hold screws very well and is strong and stable due to its construction.

The thicker boards are typically used for internal doors, sliding doors, pivot hinged doors, large conference and meeting tables, long span shelving or high quality joinery/furniture.

It is used as a substrate material suitable for re-veneering or laminating.

Check Also

Oversize BB OES Plyforms inspections ,QC checklists

Oversize BB OES Plyforms inspections ,QC checklists

Leave a Reply

Your email address will not be published. Required fields are marked *