Falcatta Lightweight Plywood inspections and QC checklists

Falcatta Lightweight Plywood inspections and QC checklists

Falcatta Plywood is a lightweight plywood (but not as light as Banova).

Typically the density profile of Falcatta is 350/400kg/m3 compared to Radiata Ply at around 600kg/m3.

Falcatta Plywood is not suitable for exterior applications and is used extensively in the Caravan/RV industry for kitchen cabinetry.

Faces are light in colour and relatively clean but in most applications the plywood is overlaid with other materials such as foils or laminate.

Note: 2745mm and 3660mm sheets are produced with scarf jointed faces.

Light Falcatta Plywood

  Lengths Thicknesses Grade Glue Bond
Falcatta Lightweight Plywood 2440 x 1220mm 2.7, 3.6, 6, 9, 12,
15, 18 & 25mm
B/B & C/C,BB/BB,OVL/BTR MUF (contains formaldehyde),E0
2745 x 1220mm 9, 12, 15 & 18mm
3660 x 1220mm 12, 15 & 18mm

 Sheet Size Pack Qty Avg Sheet Weight
2440 x 1220 x 2.7mm 380 3.2kg
2440 x 1220 x 3.6mm 295 4.3kg
2440 x 1220 x 6mm 150 7.2kg
2440 x 1220 x 9mm 110 10.8kg
2440 x 1220 x 12mm 83 14.3kg
2440 x 1220 x 15mm 63 17.9kg
2440 x 1220 x 18mm 54 21.5kg
2440 x 1220 x 25mm 40 29.8kg
2745 x 1220 x 9mm 110 12.0kg
2745 x 1220 x 12mm 83 16.0kg
2745 x 1220 x 15mm 63 20.0kg
2745 x 1220 x 18mm 54 24.1kg
3660 x 1220 x 12mm 83 21.4kg
3660 x 1220 x 15mm 63 26.7kg
3660 x 1220 x 18mm 54 32.1kg
如无特殊说明,文章均为本站原创,转载请注明出处。If there are no special instructions, the articles are original, if you want to use or reproduce, please indicate the original source www.plywoodinspection.com,If you find that our article infringes on your rights and interests, please email us in time and we will delete it at the first time.

Check Also

Veneered MDF inspection checklist and quality control

Veneered MDF inspection checklist and quality control Veneered Std MDFVeneered Std MDF Veneered MR MDF …

Leave a Reply

Your email address will not be published. Required fields are marked *