Film Faced Plywood Manufacturing : Glossy,Matte ,wiremesh Film finish

Film Faced Plywood Manufacturing : Glossy,Matte ,wiremesh Film finish

There are total three types of film surface finishes ,

1.Glossy ,like mirror Easy to reflect light,mormally the middle east and africa and asia countries like them ,it is not easy to hide the manufacturing defects of the substrate platform .

2. Matt finishes ,hard to reflect light,surface is smooth but can feel the surface finishes .

3.Wiremesh anti-slip finishes , it is easy to recognize the wiremesh press .

All these film surface finishes are easy to recognize ,touch ,watch ,and feel .All these surface types are decided by the hot pressing plates from the hot pressing machines .It has nothing relationship with the film .

When you buy the film faced plywood ,better check the suface film finishes .

Glossy

Sleek and luminous, glossy film faced plywood  is very popular . The smooth finish of the plywood surface allows colors to appear deeply saturated for a rich effect. If  plywood are not perfectly sharp and clear, glossy surface can enhance the beautifuty of the plywood .

Matte

Often used by professionals plywood manufacturers, matte plywood surface is free of shine, resulting in more muted colors. This helps to make the texture of the plywood surface more pronounced and makes the plywood ideal for highly detailed grain, such as   buildings.

Glossy film faced plywood surface finish
Glossy plywood do just what their name implies — they gloss over the plywood , giving it a nice shine. The paper and the coating behind that glossy plywood is actually made up of the same stuff as a matte surface, except that more of the final coating is used. That extra layer of shine tends to give the surface an apparent boost in color and, well, like anything with a bit of shine to it, just looks pretty.

The problem with the glossy plywood finish is that it creates glare. You’ll see light reflecting off the plywood itself, making it hard to view equally under different lighting scenarios. One of the issues many plywood have with glossy plywood is also the fingerprints they tend to attract. The finish of a glossy plywood leaves the print more susceptible to fingerprints.

Matte plywood finish
With less of that final shiny layer, matte prints offer a similar lifespan, but without that glossy sheen. Matte plywood s don’t quite have the same color boost as glossy .Matte plywood tend to be better for less vibrant color schemes .

Without that extra gloss, the matte plywood isn’t as susceptible to shine and fingerprints. In general, though it’s not always the case, professional plywood tend to choose matte over glossy because of the lower likelihood of glare and fingerprinting. While matte tends to play up texture, the surface may look bit grainer because of that enhanced texture.

 

 

 

 

如无特殊说明,文章均为本站原创,转载请注明出处。If there are no special instructions, the articles are original, if you want to use or reproduce, please indicate the original source www.plywoodinspection.com,If you find that our article infringes on your rights and interests, please email us in time and we will delete it at the first time.

Check Also

Wire Mesh Anti-slip Film Faced Plywood Manufacturing defects

Wire Mesh Anti-slip Film Faced Plywood Manufacturing defects,catalog of film faced plywood grades,Quality Control Of …

Leave a Reply

Your email address will not be published. Required fields are marked *