Film faced plywood Physical and mechanical parameters

Film faced plywood Physical and mechanical parameters

Parameter

Measurement unit

GOST 3916.1-96

EN

Actual value in 2014-2015

Ultimate split strength (bond strength)

MPa

1.0 or more

1.0 or more

2,2
Ultimate resistance to static bending along the external layer fibers

MPa

25.0 or more

47.0 or more

72,1
Ultimate resistance to static bending across the external layer fibers

MPa

N/a

38.0 or more

62,7
Modulus of elasticity for static bending along the external layer fibers

MPa

7000 or more

7000 or more

8571
Modulus of elasticity for static bending across the external layer fibers

MPa

N/a

3800 or more

6726
Moisture %

5 to 10

7,2

Formaldehyde emission

Formaldehyde emission (emission grade E1)

GOST 3916.1-96

CARB

Actual value in 2014-2015

Gas analytical method, mg/m2*hr

Up to 3.5 inclusively, or less than 5.0 within 3 days after manufacture

Up to 0.36

0,13
Chamber method, mg/m3

Up to 0.124

N/a

0,005

Check Also

Factors Influencing the Quality of Plywood

Factors Influencing the Quality of Plywood 1. Adhesive quality The performance of synthetic resin adhesives …

Leave a Reply

Your email address will not be published. Required fields are marked *