FILM-FACED PLYWOOD QC checklist and INspections

FILM-FACED PLYWOOD QC checklist and INspections

Dimensions 2500 x 1250 mm / 1250 x 2500 mm
Thicknesses 15/18/21 mm
Tolerances length/width +/- 2 mm
Type of surface both sides smooth or one side wiremesh / one side smooth
Film surface (standard) 120 g/sqm, dark-brown
Edge protection water-proofed sealing
Wood type used Birch ,Poplar,eucalyptus
Class of formaldehyde emission E1
Water resistance WBP marking
Humidity 8 %
Specific weight 590 kg/cbm
Glueing class 3, water-resistant
Bonding strength 1,5 MN/sqm (after 4 hours in boiling water)
1,35 MN/sqm (after 72 hours in boiling water)
Module of elasticity Em 5% ║ (Em90) 6.630,04 N/mm²
Em 5% ┴ (Em 0) 5.419,80 N/mm²
class E 40/60
Resistance to bending fm 5% ║ (fm90) 56,877 N/mm²
fm 5% ┴ (fm 0) 52,43 N/mm²
class F 30/30
Abrasive strength of top layers (Taber rotations) 350-400

Check Also

SAPELI inspection and qc checklist

SAPELI inspection and qc checklist

Leave a Reply

Your email address will not be published. Required fields are marked *