FLEXIBLE PLYWOODS inspection,quality control ,sourcing and testing


This flexible plywood panel is commonly called ‘Bendy plywood’ or ‘Flexi-ply’, and is used extensively in furniture and shop fitting, wherever curves are desirable, thus demanding a panel that is extremely flexible. Plywood with this flexible characteristic is manufactured from specially treated veneers, usually with a thinner central core veneer and two thicker ‘tenderized’ outer veneers. The special construction of particular species of veneers gives an unusually large degree of flexibility and offers a most cost-effective way of producing rounded columns and other curved structures of very small radius in rounded or S-shaped structures without water or the need for heat-forming. Flexible Plywood can be easily bent to shape. The arc formed by the bend is perpendicular to the grain direction of the face. The exact bending radii have to be determined in accordance with the type of surface finishing required and the extent of the surface to be treated.

  • Long & Cross Grains
  • Thickness & Size : 3 mm , 5 mm, 8mm/4’*8′
  • Origin : Malaysia, Canada,China,Indonesia ,Brazil
如无特殊说明,文章均为本站原创,转载请注明出处。If there are no special instructions, the articles are original, if you want to use or reproduce, please indicate the original source www.plywoodinspection.com,If you find that our articles infringe on your copyrights and interests, please email us at info@plywoodinspection.com in time and we will delete it at the first time.

Check Also

8X4 Barrel Bend (Short Grain); 4X8 Column Bend (Long Grain) BENDING PLYWOOD

4X8 BENDING PLYWOOD Size: 4X8, 8X4 Thickness Available: 5.2MM, 8.0MM Glues Available: MR Species: Sumauma …

Leave a Reply

Your email address will not be published. Required fields are marked *