Frame laths for beds plywood INSPECTION,quality control,testing and Sourcing

Compressed laminated wood made of beech veneers with thickness 1,5 mm is the basicsemi-finished product for the frame laths. The difference in comparison with plywood is that all veneers have got the same grain flow (thanks to it, it can reach the high bending strength in grain direction).

Boards are health harmless according to the class A (E1) – ČSN EN 1084 Plywood, Class of formaldehyde escape the method of gas analysis.


20, 25, 30, 32, 40 mm
(Other thicknesses according to customer request)


39, 50, 55, 70 mm
(Other sizes according to customer request)


1 870, 1 950, 1 960, 1 970 až 2 500 mm
(Other sizes according to customer request)


PN 10 – DY / 99 – Frame laths


6% až 12% (at the time of delivery)

The surface of frame laths can be:
– without surface finish (sanded)
– with surface finish (impregnated)
– wrapped laths (paper – 100 g/m˛, foil 300 g/m˛)

Sides and edges can be worked according to an agreement with a client.

如无特殊说明,文章均为本站原创,转载请注明出处。If there are no special instructions, the articles are original, if you want to use or reproduce, please indicate the original source,If you find that our articles infringe on your copyrights and interests, please email us at in time and we will delete it at the first time.

Check Also

 spring-slats bed slats inspection checklist quality control

 spring-slats for bed manufacturers, bed frame supports and upholstered furniture. made of durable birch and …

Leave a Reply

Your email address will not be published. Required fields are marked *