H20 Concrete Formwork Beam inspections and QC checklists

H20 Concrete Formwork Beam inspections and QC checklists

http://www.bulow-bennet.com/en/poutrelle-de-coffrage-h20/

H20 Concrete Formwork Beam

Devis gratuitEurope

1 H20 concrete formwork beams of SPRUCE and FIR.
2 The wing is made of carefully selected quality wood.

3 The core consists of a 3-layer panel, which ensures the stability of the beam and allows it to withstand all weather conditions.

4 Wing assemblies and core are inseparably joined by a splice.

5 Optional: plastic protective cap, shock resistant. Placed at the ends of the beam, this adapter provides additional protection against mechanical damage. This allows the beam to be reused several times and prolongs the beam’s life span while improving it’s strength.

6 The surface of the beams is protected by a waterproof coating which guarantees a long lifespan.

7 For greater ease of use, the length is indicated on each beam (beams are 20cm high and are produced in various standard lengths).

PROPERTIES plus Cheaper and high quality product for formwork
plus Excellent flexural strength
plus Minimal distortion
plus Waterproof and water resistant
plus Comes from sustainably managed European forests (FSC)
MATERIAL SPRUCE and FIR
DRYING KD 12 +/- 2%
WEIGHT 4,7Kg/m
BOND Hot glue, melamine resin
WINGS • Made of Spruce or Fir, carefully selected
• The wing and the core are assembled by a joint splice and are bonded crosswise (relative to the rings)
• the cross dimensions are 80 x 40 mm
• The wings can be joined together in length
• The wing is milled along its core
• The edges of the wing are planed and chamfered (up to about 0.4 mm)
CORE 3 layered Plywood plate bonded so that the rings are vertical (relative to the cross section)
CERTIFICATIONS DIN EN 13377 ; FSC
TREATEMENT The surface is completely protected by a waterproof and water-repellent coating
ADAPTABILITY With 3 layers in the core, the H20 beams can be cut to any length, without their properties being altered.
STANDARD LENGTHS 1,95 / 2,45 / 2,65 / 2,90 / 3,30 / 3,60 / 3,90 / 4,50 / 4,90 / 5,90 / maximum length: 6,00 m
DIMENSIONS AND DEVIATIONS
Dimension Value Gap
Depth of the joist 200mm +/- 2mm
Depth of the wing 40mm +/- 6mm
Width of the wing 80mm +0,8 / 1,2mm
Thickness of the wing 29mm +/- 0,87mm
TECHNICAL CHARACTERISTICS
characteristics

The values shown are valid for new formwork beams that have not yet been used, stored in suitable and properly used conditions. For beams which have been used several times, it is necessary (depending on different uses and requirements thereof) adding a proportional safety factor.
PACKING • By full container of 4600 ml
• By full truckload of 5000 ml
TRUCK PACKING • Standard Package 50 pieces / package
• Ready for immediate use on site
• Parcels placed on wooden slats that protect joists and allow you to move easily with a forklift
CONTAINER PACKING • Standard Package 100 pieces / package
• Ready for immediate use on site
• Parcels placed on wooden slates that protect joists and allow you to move easily with a forklift
DELIVERY LEAD TIME Within 3 weeks after the client has made the request
APPLICATIONS BPW & CONCRETE FORMWORK– all kinds of construction with concrete
如无特殊说明,文章均为本站原创,转载请注明出处。If there are no special instructions, the articles are original, if you want to use or reproduce, please indicate the original source www.plywoodinspection.com,If you find that our articles infringe on your copyrights and interests, please email us at info@plywoodinspection.com in time and we will delete it at the first time.

Check Also

Recycled Core Commercial  Plywood inspection,testing and quality control

Recycled Core Commercial  Plywood inspection,testing and quality control these recycled core platform are not just …

Leave a Reply

Your email address will not be published. Required fields are marked *