H20 Formwork Beams QC checklists and Inspection Rules
Wood I-beam is an important part of the international common building formwork system. It has the characteristics of light weight, high strength, good linearity, not easy to deform, water resistance, acid and alkali resistance on the surface and so on.
Unit weight 4.6 kg/m
Flange width 80 mm
Flange thickness 40 mm
1. I-beam is an important part of the international common building formwork system. It has the characteristics of light weight, high strength, good linearity, not easy to deform, surface water resistance, acid and alkali resistance, etc. It can be used year round with low cost amortization, and can be used with professional formwork system products at home and abroad.
2. It can be widely used in horizontal formwork system, vertical formwork system (wall formwork, column formwork, hydraulic climbing formwork, etc.), variable arc formwork system and heterogeneous formwork system.
3. The straight wall formwork of woodwork I-beam is a loading and unloading formwork, which is convenient to assemble and can be assembled into various sizes of formwork to a certain extent and with flexible application. The formwork has large stiffness, convenient connection length and height, and can be poured more than 10 meters at a time. Because of the light weight of the template material, the assembly of the whole template is much lighter than that of the steel template.
4. The system has high standardization of components, good reusability, and meets the requirements of environmental protection.
Unit weight: 4.6 kg/m
Flange width: 80 mm
Flange thickness: 40 mm
Web thickness: 27mm-30mm
Elastic modulus E: 10,200 N/mm2
Permissible deformation: l/500 (l = support width, m)如无特殊说明，文章均为本站原创，转载请注明出处。If there are no special instructions, the articles are original, if you want to use or reproduce, please indicate the original source www.plywoodinspection.com,If you find that our articles infringe on your copyrights and interests, please email us at firstname.lastname@example.org in time and we will delete it at the first time.