Hardboard QC Inspection Checklist : Part 3 Hardboard–Terminology and Classification

Hardboard QC Inspection Checklist : Part 3 Hardboard–Terminology and Classification

1 Subject Content and Scope of Application

This standard specifies the terminology and classification of hardboard.

This standard is applicable to rigid fiberboard without special processing.

2 Terminology

2.1 Hard fibreboard

Using plant fibers as raw materials, fiberboard with density greater than 0.80 g/cm3 was processed.

2.2 Wood Hard Fibreboard

Hard fiberboard made from wood.

2.3 Non-wood based hard fibreboard

Hard fiberboard made from non-wood plant fibers.

2.4 One-sided smooth on one’surface-hard fibreboard

Hard fiberboard with smooth one side and net marks on the other.

2.5 Two-sided smooth on two surface-hard fibreboard

Hard fiberboard with smooth front and back.

3 Classification

3.1 Classification by raw materials

It can be divided into wood hardboard and non-wood hardboard.

3.2 Classification by Plate Surface

It can be divided into one-sided and two-sided fiberboard.

keywords: wiremesh hardboard,smooth hardboard ,

如无特殊说明,文章均为本站原创,转载请注明出处。If there are no special instructions, the articles are original, if you want to use or reproduce, please indicate the original source www.plywoodinspection.com,If you find that our articles infringe on your copyrights and interests, please email us at info@plywoodinspection.com in time and we will delete it at the first time.

Check Also

Industrial Plyron hardboard face laminated inspections,testing,quality control and sourcing

Industrial Plyron – Heavy Duty Work Surface Plyron is a hardboard face laminated to a …

Leave a Reply

Your email address will not be published. Required fields are marked *