How to choose and buy wood-based panels

How to choose and buy wood-based panels, understand these to be a smart consumer!

Wood-based panels buying tips and guide

The weight, color, smoothness and so on of the board are all the key points when we buy the board. It is not comprehensive to judge the quality of the board only by one aspect. Therefore, the quality of the board is related to many factors. Now, the time for popularization of science is coming. Listen carefully!

  1. Weight of Boards

The weight of different materials is different. The weight of the board is related to the density and moisture content of the board. To judge the quality of sheets, it is necessary to combine the characteristics of various sheets and their own requirements.

  1. Smooth and smooth cut surface

Standard eco-board materials are made of solid wood, the joints of the middle wood are very tight, the cut surface is smooth and flat, while the interior materials of the fake and inferior eco-board materials are very rough, with cracks in the middle, which are easy to warp and deform. If non-environmental protection glue is used in the board, it will bring harm to the home environment.

  1. Appearance color

Good eco-board uses high-quality eco-paper veneer, bright color, clear texture, real touch, fade resistance, high temperature resistance, pattern unchanged over the years, still as new.

  1. Cross Section

The cross-section should be neat and clean, and the internal composition of the Board can be seen through the cross-section, which is an important evidence to detect the real material in the Board.

Fifth, there is no pungent smell in the board

The biggest characteristic of E0 eco-board is environmental protection. Even if it is sawn, the inside of the board is more of the flavor of logs. There is no pungent bad odor. The environmental protection requirement of good board to the board has reached a critical level, requiring to ensure that every board manufactured strictly meets the national E0 standard and refuses to deceive consumers.

 

如无特殊说明,文章均为本站原创,转载请注明出处。If there are no special instructions, the articles are original, if you want to use or reproduce, please indicate the original source www.plywoodinspection.com,If you find that our article infringes on your rights and interests, please email us in time and we will delete it at the first time.

Check Also

CARB P1 ,CARB P2 Formaldehyde release standard

CARB P1 ,CARB P2 Formaldehyde release standard Carb P1: Formaldehyde release from MDF < 0.21ppm/M3 …

Leave a Reply

Your email address will not be published. Required fields are marked *