Breaking News

How to choose plywood is the key to determine the quality of plywood

How to choose plywood is the key to determine the quality of plywood

When selecting plywood, in addition to appearance quality, internal quality is more important. Veneer production, adhesive used and veneer bonding process are three important factors that determine the quality of plywood. Whether the quality of plywood is environmental protection, bonding strength and easy deformation.

1. Adhesive quality

The performance of adhesives is an important factor affecting the structural strength and performance stability of wood-based panels. The synthetic resin used in plywood production has excellent performance, enough bonding strength, reasonable distribution ratio of each adhesive group, stable performance of the prepared adhesive, suitable resin content and viscosity, and long enough active period, so as to ensure normal operation and all indexes of the product meet the requirements. In addition, the environmental performance of adhesive determines the environmental quality of finished plywood.

2. Veneer quality

Veneer quality has a great influence on bonding strength. Veneer is made of solid wood section by rotary cutting. Enough attention has been paid to the preparation of wood section and veneer rotary cutting processes. Wood softening treatment has been well carried out. The rotary cutting conditions have been well controlled to make veneer indicators in the best value. Meanwhile, the moisture content and flatness of veneer have been ensured to avoid deformation of finished plywood.

3. Plywood bonding

Before glue pressing, we should pay attention to the two links of sizing amount and slab aging. If the amount of glue is too large, the cost will be high; if the glue layer is too thick, the internal stress will increase, and it is easy to penetrate the glue; if the amount of glue is too small, it is not conducive to the infiltration of glue, and the glue layer will be incomplete. Plywood has been kept aging for a suitable period of time, and make reasonable changes with climate change. The whole core plate is realized, and the lamination and separation of core plate are reduced. Excessive use of viscose will also cause excessive formaldehyde emission.

如无特殊说明,文章均为本站原创,转载请注明出处。If there are no special instructions, the articles are original, if you want to use or reproduce, please indicate the original source,If you find that our articles infringe on your copyrights and interests, please email us at in time and we will delete it at the first time.

Check Also

Tribunal Makes Finding-Decorative and Other Non-structural Plywood from China

From: Canadian International Trade Tribunal The Canadian International Trade Tribunal today found that the dumping …

Leave a Reply

Your email address will not be published. Required fields are marked *