Is the flame retardant density board the higher the density, the better the strength?
At present, more and more attention has been paid to the issue of personal safety in public places. As an essential decoration of public places, flame retardant density boards are gradually recognized by all. But I don’t know much about flame retardant density boards, so I have some doubts when I buy them. I just don’t know if the higher the density of flame retardant density boards, the better the strength. Density is not equal to strength.
Some flame retardant board manufacturers produce dense boards with heavy handle and high density, but once they meet with water, they will find that the expansion is very strong and the strength will be greatly reduced. This is due to the use of inferior flame retardants in production, in order to make up for the shortage of dense boards and increase the amount of sizing. Some boards feel not heavy, but the strength of the board is very good, not easy to deform or damage. So a high density is not necessarily a good strength. So Xiaobian tells you the correct understanding, should be flame retardant density plate moderate strength.
Therefore, when choosing flame retardant density board, first look at its performance density, and then see whether it has passed the National Wood-based Panel Quality Supervision and Inspection Center test, whether it has reached E0 or E1 standards. All these are very important. It is suggested that we should know about flame retardant panels in many ways before purchasing, and inspect the manufacturers of flame retardant density panels more.如无特殊说明，文章均为本站原创，转载请注明出处。If there are no special instructions, the articles are original, if you want to use or reproduce, please indicate the original source www.plywoodinspection.com,If you find that our articles infringe on your copyrights and interests, please email us at firstname.lastname@example.org in time and we will delete it at the first time.