Laminated Veneer Lumber (LVL) inspections and QC CHECKLIST
Laminated Veneer Lumber (LVL) is manufactured from specially selected eucalyptpus and pine veneers. State-of-the-art manufacturing technology, coupled with a rigid quality control program, assures a precise veneer lay-up and provides for proper distribution of the natural characteristics in wood, further assurance of LVL structural integrity.
An alternate product to large sawn beams, • Great stability; steel beams and long-span trusses; • Nails easily; • Standard thickness: 1 3/4 “; • Glues easily with • Standard lengths, 8′ through 60′. In billets minimum preparation; or specified widths. Precision end trimmed lengths available; • High load capacity; • Long spans; solid lumber stress values, for precise design and improved applications; • Appearance (visual application); • Easily worked with conventional tools; • Easy handling, lightweight; • Assured structural properties , the product of choice for all of your residential, commercial and industrial construction applications.
. ADVANTAGES • Always edge sealed and paper-wrapped • Product guarantee; for storage, unless mentioned; • Full technical support.
FACTORED RESISTANCES (JOIST AND BEAM)
Factored resistance in bending Mr (lb-ft)
Factored resistance in shear Vr (lb)
Moment of inertia (po4
SPECIFIED STRENGTHS AND MOE psi
Modulus of elasticity
Tension parallel to grain
Compression perpendicular to grain
Compression parallel to grain
如无特殊说明，文章均为本站原创，转载请注明出处。If there are no special instructions, the articles are original, if you want to use or reproduce, please indicate the original source www.plywoodinspection.com,If you find that our article infringes on your rights and interests, please email us in time and we will delete it at the first time.