Laser cutting plywood manufacturers talk about the characteristics of cutting processing

Laser cutting plywood manufacturers talk about the characteristics of cutting processing

China Laser processed wood products, plywood, mainly used in toys, crafts, ornaments, cultural goods, sports goods, musical instruments, advertising supplies, tourist souvenirs, all kinds of card boxes and other products.

For example: children’s puzzle toys, splice puzzles, assembly models, bamboo slips, wood depictions, greeting cards, bookmarks, business cards, guitars, rackets, all kinds of small pendulums, key chains, wooden poker, cards, and so on.

In this range, compared with bamboo and wood products, plywood is more widely used and more universal.

Compared with other thermal cutting methods, laser cutting has the general characteristics of fast cutting speed and high quality. It can be summarized as follows.

_Good cutting quality

Owing to the small laser spot, high energy density and fast cutting speed, laser cutting can obtain better cutting quality.

Laser cutting plywood

The comparison of laser cutting, oxyacetylene cutting and plasma cutting is shown in Table 1. The cutting material is 6.2mm thick low carbon steel plate.

_Cutting efficiency

Owing to the transmission characteristics of laser, laser cutting machine is usually equipped with several CNC workbenches, and the whole cutting process can be fully CNC. In operation, only changing the NC program can be used for cutting parts of different shapes. It can be used for two-dimensional cutting and three-dimensional cutting.

Fast cutting speed

_The cutting speed of 2 mm thick low carbon steel plate can reach 600 cm/min by 1200 W laser power, and that of 5 mm thick polypropylene resin plate can reach 1200 cm/min. Material does not need clamping and fixing in laser cutting, which can not only save fixture, but also save the auxiliary time of loading and unloading.

Non-contact Cutting

Laser cutting torch has no contact with workpiece, and there is no tool wear. To process parts of different shapes, it is not necessary to replace the “cutter”, but only to change the output parameters of the laser. The laser cutting process has low noise, low vibration and no pollution.

Laser cutting plywood

Laser cutting of basswood plywood, high temperature will make the formaldehyde in the wood incision volatilization, formaldehyde in other places is impossible to volatilize.

Laser has the characteristics of energy concentration, so when cutting linden plywood, only the incision will have high temperature, and the temperature in other places is not high, which will not cause formaldehyde volatilization.

Laser cutting uses a high power density laser beam to irradiate the cutting material, so that the material is quickly heated to vaporization temperature, evaporation to form a hole. With the beam moving to the material, the hole continuously forms a narrow width of the slit to complete the cutting of the material.

Plywood is a kind of three or more layers of laminated material, which is made up of wood segments cut into veneers or planned into thin wood, then bonded with adhesives. Odd layers of veneers are usually used, and the fibers of adjacent layers of veneers are bonded vertically to each other. It is one of the commonly used furniture materials, one of the three panels of wood-based panels, and also can be used for aircraft, ships, trains, automobiles, buildings and packing boxes.

Selection of Laser Cutting Basswood Plywood

Laser cutting of linden plywood:

1. Laser cutting of basswood plywood, high temperature will volatilize formaldehyde in wood incision, formaldehyde in other places is impossible to volatilize.

2. Laser has the characteristics of energy concentration, so when cutting linden plywood, only the incision will have high temperature, and the temperature in other places is not high, which will not cause formaldehyde volatilization.

Basswood plywood

Laser cutting uses a high power density laser beam to irradiate the cutting material, so that the material is quickly heated to vaporization temperature, evaporation to form a hole. With the beam moving to the material, the hole continuously forms a narrow width of the slit to complete the cutting of the material.Laser processed wood products, plywood, mainly used in toys, crafts, ornaments, cultural goods, sports goods, musical instruments, advertising supplies, tourist souvenirs, all kinds of card boxes and other products.

Check Also

Plywood – Laser Cutting and Engraving

Plywood – Laser Cutting and Engraving The use of plywood in laser cutting is especially …

Leave a Reply

Your email address will not be published. Required fields are marked *