MDF Slatwall Panel 4′ x 8′ White Finish With Aluminum Insert

Slots are slots that are used to form grooves on the surface of density boards or other boards to form decorative strips or fixtures. Common channel stripe
The distance between them is equal, it is processed by specialized machines. Type in punching plate.
product properties:
1, slot type: T type (open horizontal and vertical slots)
2, the slot distance is generally: 7, 7.5 9.5 11.5 14.5 16.5 28, in addition to special needs of customers can adjust knife customization (price another operator).
3 Specifications: 2440mm*1220mm*18mm/15mm (large board)
1220mm*1220mm*18mm/15mm (small board)
2, thickness: 3mm, 5mm, 9mm, 12mm, 15mm, 16mm, 18mm, 20mm, 25mm, 30mm, in which the thickness of the slot plate is mostly 18mm and 15mm.
3, template: matte (soft light), light (mirror), hemp surface, relief and so on. The surface can be made of water ripples, geometric patterns or wood grain and other lines style, the price is negotiable
4, Material: Poplar, Yang miscellaneous, Australian pine, Ou Song and other density board.
5, grade: The company’s products are mostly exported to Europe E2 level, E1 level and CABR level price negotiable.
6, the surface: melamine veneer or UV density board (single or double paste) conventional single veneer.
7, color: titanium white, warm white, gray, black, orange, lake blue, cherry, walnut, beech, maple, white oak, teak, Sapele and so on.

MDF Slatwall Panel 4′ x 8′ White Finish With Aluminum Insert

MDF slatwall panel with a white finish. With no special groove treatments. Horizontal 4′ x 8′ – 3″ on Center.

  •  MDF slatwall panel
  • White Finish
  • Aluminum Metal Inserts
  • Horizontal 4′ x 8′
  • 3″ on Center
  • Perfect solution for organizing your equipment’s
  • The finish provides a stunning display option for your merchandise

Slatwall without metal inserts weigh 90 lbs ea, 110 lbs with Aluminum inserts. Standard slatwall size is: 3″ On Center, 4′ Tall x 8′ W x 3/4″ D and the slots run the 8′ direction.

Materials (Substrates)

MDF or Medium Density Fiberboard has a core density of at least 48 lbs,
130 I . B.(Internal Bonding Strength) and a paint grade surface.

Formaldehyde

Formaldehyde emissions are rated at 3ppm or less.
This complies withHUD 24 cfr parts 3280 standards for particle board used in manufactured housing.

Fire Rating

Our slatwall products meet a CLASS C fire rating as determined by standard ASTM E-84 twenty-five foot tunnel surface test method. Class A slatwall is available as a special order. To be rated class A, your panel must be a high pressure laminate and must have metal inserts. One may also use metal slatwall.

Panel Orientation and Size

Horizontal 4′ W x 8′ T
Note: Horizontal is recommended for best looking and easiest installations on most walls.
Panels have half grooves. When stacking, seam is in the middle of the groove. All horizontal slatwall panels are made for stacking and have 1/2 grooves – top & bottom.
Vertical 8′ T x 4′ W
Vertical panels do not have 1/2 grooves & do not stack.
All sizes and configurations are manufactured to plus or minus 1 / 16″.  Panel squareness is to be determined by measuring diagonally from corner to corner.   Standard machine made panels measure 48″ x 96″ in horizontal with grooves running 96″ and 96″ x 48″ in vertical with grooves running 48″

Metal Inserts

All metal inserts are “mill finish aluminum”.
Black inserts are available at an additional cost.
Note: Metal inserts MUST be installed by factory & cannot be added later.