MDF Surface Inspection

MDF Surface Inspection

Surface cleanliness: There should be no obvious particles on the surface of density plate with good surface cleanliness. Particles are caused by impurities brought into the process of pressing, which not only affects the beauty, but also makes the paint film easy to peel off.

Surface smoothness: When touching the surface with hand, it should have a smooth feeling. If the feeling is more astringent, it means that the processing is not in place.

Surface smoothness: The surface of density plate should be bright and smooth. If the surface is uneven from the side, it indicates that there is a problem with the material or coating technology.

Overall elasticity: Harder plates must be inferior products.

如无特殊说明,文章均为本站原创,转载请注明出处。If there are no special instructions, the articles are original, if you want to use or reproduce, please indicate the original source,If you find that our article infringes on your rights and interests, please email us in time and we will delete it at the first time.

Check Also

Veneered MDF inspection checklist and quality control

Veneered MDF inspection checklist and quality control Veneered Std MDFVeneered Std MDF Veneered MR MDF …

Leave a Reply

Your email address will not be published. Required fields are marked *