MDF-UltraLight

MDF-UltraLight has been produced with an average density that is approximately 30% lighter than MDF density product. Panels can be laminated and machined, however these operations do require more care in order to produce a high quality result.

More info please visit http://www.dongwha.com/nz/product/prodect_1_06.asp ,thanks .there are many good brand names of ULTRA LIGHT MDF

MDF-UltraLight is suitable for interior applications where weight of the finished assembly is an important consideration. Caravan and mobile home fittings are good applications for MDF-UltraLight. Try MDF-UltraLight as a substrate for overlaid benchtops either as a single thickness panel or in multiple laminated panels to give the desired bulk.

02. Environment

You can request any of our products with 100% FSC® wood source which means that you are assured that the wood chips are sources from sustainably managed forests. We also have several options to provide you with low formaldehyde emission products

03. Specification

<MDF-Ultralight Aim Properties when tested to JIS A 5905>

detail view
Property(Aim) METRIC 12mm 18mm 25mm 30mm 35mm
Density kg/m³ 540 540 540 540 540
Internal Bond MPa 0.5 0.5 0.5 0.5 0.5
Moisture Content % 6 6 6 6.5 6.5
Thickness Swell % 12 9 8 6 6
MOE MPa 2200 2200 2200 2400 2400
MOR MPa 26 26 26 27 27
detail view
Property(Aim) IMPERIAL 0.472 in 0.709 in 0.984 in 1.181 in 1.378 in
Density lb/ft³ 33 33 33 33 33
Internal Bond lb/in² 72.5 72.5 72.5 72.5 72.5
Thickness Swell % 12 9 8 6 6
Moisture Content % 6 6 6 6.5 6.5
MOE lb/in² 319000 319000 319000 348000 348000
MOR lb/in² 3770 3770 3770 3910 3910

NOTES :These values represent anticipated average values and are guidelines only. Please note that Dongwha New Zealand Limited reserve the right to change product specifications without notice. Other thicknesses are available on request. Click here for more detailed specifications

detail view
General Tolerances
Length/Width +/- 2 mm (+/- 0.079 in)
Thickness Tolerance +/- 0.15 mm (+/- 0.006 in)
Straightness 1.125 mm/m (0.015 in/ft)
Squareness <1.5 mm/m (<0.018 in/ft)
Sanding grit 180