MDF vs Plywood: Make The Right Choice

MDF vs Plywood: Make The Right Choice

There are different types of engineered wood available in the market like plywood, MDF, hardboard, particle boardblock board, etc. Plywood and MDF are both engineered wood products popularly used for home décor and furniture making. When we compare MDF vs plywood, both have their own pros and cons. These products have their own set of distinctive properties which makes them very diverse from one another. Hence, here we have tried to give you a brief comparison of MDF vs plywood to help you make the correct choice.

Also Read: Solid (Natural) Wood vs Plywood vs Blockboard vs HDF vs MDF vs Particle Board: Make the Right Choice of Engineered Wood
MDF vs Plywood
Courtesy - 123rf

01. Material

MDF

  • Medium Density Fiberboard is an engineered wood composite made by mixing the wood fibres with wax and resin binders and made into sheets by applying high temperature and pressure.

Plywood

  • Plywood is a wooden panel; made by stacking several thin layers of wood veneers over each other.

02. Uses

MDF

  • MDF is mostly used for making ready-made furniture, cabinets, and shelves in storage units.
  • They are extensively used in decorative wall cladding and embossed jalis.
  • Transparent partitions are also made by carving MDF board sheets to give contemporary or traditional look.

Plywood

  • Most commonly used for making custom built furniture for home and offices.
  • It is also used in building construction in the form of concrete shuttering panels, floors, walls and roofs.
  • BWR grade plywood is used in making kitchen cabinets and other kitchen furniture.
  • Marine plywood is used for making boats and ships.

03. Properties

(a) Resistance To Physical Components

01. Water

MDF

  • MDF soaks water like a sponge and begins to degrade into small pieces.

Plywood

  • Plywood has more resistance to wards water.

02. Impact

MDF

  • Its impact resistance is lower as compared to that of plywood.

Plywood

  • It has the ability to withstand short term overload.

03. Warping and Cracking

MDF

  • MDF can be easily split and damaged.

Plywood

  • Due to its cross-laminated structure, plywood has more resistance to warping and cracking.

(b) Appearance

MDF

  • As it is consistent throughout the edges. MDF has smooth and uniform surface and wood grains are not visible.

Plywood

  • The layers of wood veneers are visible from the edges. It often splinters on the edges.

(c) Weight

MDF

  • MDF is light in weight when compared with plywood.

Plywood

  • It is comparatively heavier than MDF.

(d) Cutting

MDF

  • MDF can be easily cut and offers smooth surface after cutting.

Plywood

  • Plywood should be cut carefully as it will splinter on the edges.

(e) Fitting

MDF

  • MDF does not hold screws well as it is made up of very fine fibers.

Plywood

  • Plywood can hold screws very well.

(f) Surface Finishing

MDF

  • MDF can be easily laminated, veneered or lacquered. It is not preferred to paint MDF, as it absorbs the paint. If MDF is painted using duco paint, it will be more expensive than plywood.

Plywood

  • Plywood can be easily painted, laminated, veneered or lacquered.

(g) Toxicity

MDF

  • Formaldehyde resins are used to bind MDF making it toxic.

Plywood

  • Plywood is emits VOC’s but it is also available in low or no VOC’s emission grade.

(h) Strength and Durability

MDF

  • When compared with plywood, MDF has less strength and durability.

Plywood

  • It has high strength as well as durability owning to its cross laminated structure.
如无特殊说明,文章均为本站原创,转载请注明出处。If there are no special instructions, the articles are original, if you want to use or reproduce, please indicate the original source www.plywoodinspection.com,If you find that our articles infringe on your copyrights and interests, please email us at info@plywoodinspection.com in time and we will delete it at the first time.

Check Also

Types of Plywood (Home Depot ) inspection,quality control ,sourcing ,testing 

Types of Plywood https://www.homedepot.com/c/ab/types-of-plywood/9ba683603be9fa5395fab909d37f448 Plywood is ideal for applications in residential and light-duty construction and …

Leave a Reply

Your email address will not be published. Required fields are marked *