Particle Board QC Inspection Checklist : Part 6 Basics steps in the process

Particle Board QC Inspection Checklist : Part 6 Basics steps in the process

Chinese Particle BOARD Grading rules and defects ,manufacturing process ,PRODUCTION checking

1. Raw material prepared
2. Converted into particles
3. Particles dried
4. Particles classified
5. Blended with a resin and additives
6. Particle/resin/additive blend (“furnish”) is formed
into a mattress
7. Hot pressed to compact the particles together
and cure the resin
8. Cooled and finished

如无特殊说明,文章均为本站原创,转载请注明出处。If there are no special instructions, the articles are original, if you want to use or reproduce, please indicate the original source www.plywoodinspection.com,If you find that our article infringes on your rights and interests, please email us in time and we will delete it at the first time.

Check Also

CARB P1 ,CARB P2 Formaldehyde release standard

CARB P1 ,CARB P2 Formaldehyde release standard Carb P1: Formaldehyde release from MDF < 0.21ppm/M3 …

Leave a Reply

Your email address will not be published. Required fields are marked *