Particle BOARD TECHNICAL SPECIFICATIONS

Particle BOARD TECHNICAL SPECIFICATIONS

PROPERTIES ANSI A208.1-2016 (Grade M-2)
Metric Imperial
Density 620-670 kg/m3 38.7–41.8 lb/ft3
Internal Bond 0.40 N/mm2 58 psi
Modulus of Rupture 13.0 N/mm2 1,885 psi
Modulus of Elasticity 2,000 N/mm2 290,100 psi
Screw Holding, Face 900 N 202 lb
Screw Holding, Core 800 N 180 lb
Moisture Content Max. 10%
Thickness Tolerance – Between Panels ± 0.200 mm ± 0.008 in
Thickness Tolerance – Within Panels ± 0.100 mm ± 0.004 in
Length/Width ± 2.0 mm ± 0.080 in
Linear Expansion ≤ 0.40%
Formaldehyde Emissions ≤ 0.04 ppm

如无特殊说明,文章均为本站原创,转载请注明出处。If there are no special instructions, the articles are original, if you want to use or reproduce, please indicate the original source www.plywoodinspection.com,If you find that our article infringes on your rights and interests, please email us in time and we will delete it at the first time.

Check Also

THIN CHIPBOARD inspection checklist and quality control

THIN CHIPBOARD inspection checklist and quality control 如无特殊说明,文章均为本站原创,转载请注明出处。If there are no special instructions, the articles …

Leave a Reply

Your email address will not be published. Required fields are marked *