Physical and Mechanical Properties of Standard Grade Rubberwood HMR MDF

Robin HMR V313 MDF (High Moisture Resistant Medium Density Fibreboard) utilises melamine urea formaldehyde resin to enhance its phycial properties to meet the stringent V313 cycli test, in order to provide a suitable product for use in high moisture conditions

Main Application : Kitchen cabinets, skirtings, mouldings, architraves, shelving, bathroom vanities and wash tub areas.

Not suitable for exterior application or exposure to water and prolonged high humidity such as saunas or shower cabinets.

Wet Cyclic Test (V313)

A Wet Cyclic Test (V313) consists of a three cycle accelerated ageing treatment followed by strength testing.

Conditioned test samples are immersed in water at 20 degrees Celsius for 3 days (72 hours), frozen at -12 degrees Celsius for 1 day (24 hours) and oven baked at 70 degrees Celsius for 3 days (72 hours).

This 3 days immersion, 1 day frozen and 3 days heated cycle is carried out 3 times (total 21 days) and then followed by post conditioning and physical testing based on test methods specified by EN 622.

Physical and Mechanical Properties of Standard Grade Rubberwood HMR MDF

https://www.robinmdf.com/moisture-resistant-mdf

如无特殊说明,文章均为本站原创,转载请注明出处。If there are no special instructions, the articles are original, if you want to use or reproduce, please indicate the original source www.plywoodinspection.com,If you find that our articles infringe on your copyrights and interests, please email us at info@plywoodinspection.com in time and we will delete it at the first time.

Check Also

Prime Coat MDF inspection,sourcing,buying guide,quality control ,manufacturing

  Prime Coated MDF is a better solution for an excellent paint finish in the …

Leave a Reply

Your email address will not be published. Required fields are marked *